Description
The Honeywell FS-TSRO-0824 is an eight-channel digital output relay Field Termination Assembly (FTA) for Honeywell FSC safety systems. It interfaces the system interconnection cable SIC-C-12 with external field wiring through screw terminals. Each channel uses relay-based, potential-free switching with a fused normally open (NO) contact and an LED status indicator. The module supports 24 VDC control input and switched AC or DC field loads.
Functional Description
The FS-TSRO-0824 provides the electrical interface between Honeywell FSC controller output modules and external field devices. Control signals are transferred through the SIC-C-12 system interconnection cable, while the FTA distributes the relay-switched outputs to field wiring.
Its eight relay channels provide electrically isolated, potential-free contacts for switching external loads. Each channel incorporates three relays, a 5 A slow-acting fuse for the field contact, and an LED indicating the energized state.
Output Configuration
Each of the eight channels provides a fused normally open relay output. The contacts support switching of loads up to the specified voltage and power limits, including 115 VAC and 230 VAC applications where the load characteristics remain within the relay ratings.
The maximum output current is 5 A per channel, subject to fuse protection and the applicable switching-load curve. For DC inductive loads, spark-suppression diodes are required. The minimum specified switching load is 1 mA at 5 V.
System Connection and Mounting
The FTA connects to the FSC system through the SIC-C-12 interconnection cable. The cable connects the assembly to a redundant pair of 10201/2/1 modules, subject to the applicable system configuration.
The module uses a snap-in mounting arrangement for standard TS32 or TS35 x 7.5 DIN EN rails. Screw terminals provide the connection points for external field wiring.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | FS-TSRO-0824 |
| Brand | Honeywell |
| Product Type | Safe Digital Output Relay FTA |
| System | Honeywell Safety Manager |
| Number of Output Channels | 8 |
| Relay Configuration | 3 relays per channel |
| Output Contact | Potential-free, floating NO contact |
| Nominal Input Voltage | 24 VDC |
| Maximum Input Voltage | 36 VDC |
| Relay Pick-up Voltage | 19.2 VDC |
| Input Current | Typically 40 mA at 24 VDC |
| Maximum Output Current | 5 A (fused) |
| Minimum Output Current | 1 mA at 5 V |
| Maximum Output Voltage | 250 VAC / 250 VDC |
| Maximum Switched Load | 1250 VA / 150 W |
| Fuse Rating | 5 AT, slow-acting |
| Fuse Dimensions | 5 x 20 mm |
| Fuse Manufacturer | Schurter |
| Fuse Part Number | 0001.2511 |
| AC Switching Rating | 250 VAC, 5 A |
| DC Switching Rating | 24 VDC, 5 A; 48 VDC, 1 A; 110 VDC, 500 mA |
| Maximum Switching Frequency | 20 Hz |
| Contact Material | Gold flash over silver alloy |
| Coil-to-Contact Isolation | 4000 VAC |
| Contact-to-Contact Isolation | 1200 VAC |
| Safety Classification | Up to SIL 3 |
| Approvals | CE, UL, TUV, CSA |
| Mounting | TS32 / TS35 x 7.5 DIN EN rail |
| Module Dimensions | 300 x 70 x 60 mm (L x W x H) |
| Required Rail Length | 301 mm |
| Maximum Wire Diameter | 2.5 mm2 (AWG 14) |
| Wire Strip Length | 7 mm |
| Terminal Tightening Torque | 0.5 Nm |
| Operating Temperature | -5 to +60 deg C |
Installation and Wiring Considerations
The FS-TSRO-0824 uses screw terminals for field connections. The specified wiring limits are important when preparing replacement wiring or checking an existing installation:
- Maximum conductor cross-section: 2.5 mm2 (AWG 14).
- Wire stripping length: 7 mm.
- Terminal tightening torque: 0.5 Nm.
- Mounting rail: TS32 or TS35 x 7.5 DIN EN rail.
The relay contacts are rated according to the switched voltage and load characteristics. The 5 A rating should not be treated as a universal rating across all DC voltages. For DC inductive loads, the original relay data specifies the use of spark-suppression diodes. Relay electrical life also depends on the actual contact current and switching load.
Frequently Asked Questions
Q: How many output channels does the Honeywell FS-TSRO-0824 provide?
A: It provides eight independent relay output channels. Each channel contains three relays, a fused normally open contact and an LED status indicator.
Q: Can the FS-TSRO-0824 switch 115 VAC and 230 VAC loads?
A: Yes. Its relay contacts support AC switching up to 250 VAC, with a maximum rated current of 5 A. Actual load suitability must be checked against the resistive or inductive switching-load curve.
Q: What should be checked when replacing an FS-TSRO-0824?
A: Verify the complete part number, hardware revision, system interconnection cable, controller output configuration, terminal assignments and field load ratings. The Safety Manager hardware reference identifies SICC-0001/Lx as the interconnection cable and SDO-0824 as the associated output module configuration. Do not assume that a similarly numbered relay FTA is interchangeable.
Correction to the earlier connection description: The current Honeywell Safety Manager hardware reference specifies SICC-0001/Lx and SDO-0824 for this TSRO-0824 configuration, rather than relying on the older FSC connection description.
Features
We welcome bulk orders and have a minimum order quantity of just one unit.
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.