Skip to content
Honeywell TK-HAO081 HART Analog Output Module

Honeywell TK-HAO081 HART Analog Output Module

  • 12 In stock
  • Manufacturer: HoneyWell

  • Product No.: TK-HAO081

  • Condition: In stock

  • Product Type: HART Analog Output Module

  • Product Origin: USA

  • Payment:T/T, Western Union

  • Weight: 220g

  • Shipping port: Xiamen

  • Warranty: 12 months

{"id":41910091841626,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"TK-HAO081","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Honeywell TK-HAO081 HART Analog Output Module","public_title":null,"options":["Default Title"],"price":18400,"weight":220,"compare_at_price":32500,"inventory_management":"shopify","barcode":"USA","requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}

Description

The Honeywell TK-HAO081 is an 8-channel HART analog output module in the Honeywell Chassis Series A I/O (CIOM-A) family. It provides configurable voltage and current outputs for transmitting controller commands to field devices. The module supports both HART and non-HART operation, with individual channel configuration, 10 ms module scan time, and conformal-coated construction.

Technical Specifications

Parameter Specification
Model TK-HAO081
Brand Honeywell
Product Type HART Analog Output Module
I/O Family Chassis Series A (CIOM-A)
Number of Channels 8
Non-HART Voltage Output Ranges +/-10 V, 0-10 V
Non-HART Current Output Range 4-20 mA
HART Output Range 4-20 mA
HART Protocol Revision 5.7
Module Scan Time 10 ms for all 8 channels
Voltage Resolution 16 bits (+/-10 V); 15 bits (0-10 V)
Current Resolution 15 bits
Overvoltage Protection 24 VAC/VDC continuous at room temperature
Maximum Power Dissipation 6.3 W
Backplane Current at 24 VDC 0.230 A
Backplane Current at 5 VDC 0.200 A
Isolation Test Voltage 2550 VDC, user terminals to system, 1 second
Conformal Coating Yes

Output Configuration and Signal Operation

The TK-HAO081 converts controller output values into analog electrical signals for field equipment. Its eight channels support voltage or current output configurations. Non-HART channels can be configured for +/-10 V, 0-10 V, or 4-20 mA operation, while HART-enabled channels use the 4-20 mA current range.

The output resolution depends on the selected signal range. The voltage output provides 16-bit resolution in the +/-10 V range and 15-bit resolution in the 0-10 V range. Current output uses 15-bit resolution, allowing the controller to represent output commands as corresponding analog signal levels.

HART Communication

For compatible HART field instruments, the module supports HART Protocol Revision 5.7 over the 4-20 mA output loop. This allows analog control signaling and HART digital communication to share the same current loop. HART operation is distinct from non-HART voltage output configuration and should be considered when defining channel assignments and field-device requirements.

System Integration

The TK-HAO081 belongs to the Honeywell Chassis Series A I/O family. It communicates with the control system through the I/O ControlNet architecture. Its conformal-coated construction distinguishes it from the corresponding uncoated TC-HAO081 model.

The module's eight outputs are used to transmit controller commands to compatible field devices. During replacement, the existing I/O configuration, channel assignments, HART requirements, and termination hardware should be checked against the installed system.

Output Response and Protection

The module has a 10 ms scan time across all eight channels. Voltage outputs settle to 95% of their final value in less than 8.5 ms. Current output settling time is less than 23 ms without HART and less than 35 ms with HART.

Additional output characteristics include:

  • Voltage output accuracy: better than 0.1% of range at 25 deg C.
  • Current output accuracy: better than 0.15% of range at 25 deg C.
  • Current output short-circuit limitation: 21 mA or less.
  • Electronic current limiting for voltage outputs.
  • Open-loop current detection for commanded outputs above 0.1 mA.

The 2550 VDC isolation test specification applies between user terminals and the system. It should not be interpreted as evidence of channel-to-channel galvanic isolation; the Honeywell Control Builder reference classifies this module as non-isolated.

Installation and Termination

The module uses the Honeywell Chassis Series A mounting platform. The documented termination option is the TC-TBNH 20-position terminal block. Remote termination arrangements are also available for Series A analog I/O, subject to the appropriate cable and termination assembly selection.

The module receives its operating power through the chassis backplane, while field-side power is provided separately. Verify field loop power, terminal assignments, and the selected voltage or current configuration before connecting field devices.

Frequently Asked Questions

Q: What is the difference between TK-HAO081 and TC-HAO081?

A: Both models belong to the same HART analog output module family. The TK-HAO081 has conformal coating, whereas the TC-HAO081 is the uncoated version.

Q: Can the TK-HAO081 provide both voltage and HART current outputs?

A: It supports voltage and current configurations in non-HART operation. HART-enabled channels use 4-20 mA current output and do not support voltage output in that configuration.

Q: Is the TK-HAO081 suitable for C200E-based systems?

A: Honeywell's Experion LS technical specifications identify CIOM-A I/O modules as usable with the C200E control processor. The module communicates through the I/O ControlNet architecture. The installed chassis, controller configuration, and channel assignments should be verified before replacement.

Features

We welcome bulk orders and have a minimum order quantity of just one unit.

Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.

For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.

We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.

We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.

Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.

Featured

Complementary products