{"product_id":"honeywell-tk-hao081-hart-analog-output-module","title":"Honeywell TK-HAO081 HART Analog Output Module","description":"\u003cp\u003eThe Honeywell TK-HAO081 is an 8-channel HART analog output module in the Honeywell Chassis Series A I\/O (CIOM-A) family. It provides configurable voltage and current outputs for transmitting controller commands to field devices. The module supports both HART and non-HART operation, with individual channel configuration, 10 ms module scan time, and conformal-coated construction.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003cfigure\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eTK-HAO081\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHoneywell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHART Analog Output Module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Family\u003c\/td\u003e\n\u003ctd\u003eChassis Series A (CIOM-A)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of Channels\u003c\/td\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-HART Voltage Output Ranges\u003c\/td\u003e\n\u003ctd\u003e+\/-10 V, 0-10 V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNon-HART Current Output Range\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHART Output Range\u003c\/td\u003e\n\u003ctd\u003e4-20 mA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHART Protocol\u003c\/td\u003e\n\u003ctd\u003eRevision 5.7\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModule Scan Time\u003c\/td\u003e\n\u003ctd\u003e10 ms for all 8 channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage Resolution\u003c\/td\u003e\n\u003ctd\u003e16 bits (+\/-10 V); 15 bits (0-10 V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent Resolution\u003c\/td\u003e\n\u003ctd\u003e15 bits\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOvervoltage Protection\u003c\/td\u003e\n\u003ctd\u003e24 VAC\/VDC continuous at room temperature\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Power Dissipation\u003c\/td\u003e\n\u003ctd\u003e6.3 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Current at 24 VDC\u003c\/td\u003e\n\u003ctd\u003e0.230 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBackplane Current at 5 VDC\u003c\/td\u003e\n\u003ctd\u003e0.200 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIsolation Test Voltage\u003c\/td\u003e\n\u003ctd\u003e2550 VDC, user terminals to system, 1 second\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConformal Coating\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/figure\u003e\n\u003ch3\u003eOutput Configuration and Signal Operation\u003c\/h3\u003e\n\u003cp\u003eThe TK-HAO081 converts controller output values into analog electrical signals for field equipment. Its eight channels support voltage or current output configurations. Non-HART channels can be configured for +\/-10 V, 0-10 V, or 4-20 mA operation, while HART-enabled channels use the 4-20 mA current range.\u003c\/p\u003e\n\u003cp\u003eThe output resolution depends on the selected signal range. The voltage output provides 16-bit resolution in the +\/-10 V range and 15-bit resolution in the 0-10 V range. Current output uses 15-bit resolution, allowing the controller to represent output commands as corresponding analog signal levels.\u003c\/p\u003e\n\u003ch3\u003eHART Communication\u003c\/h3\u003e\n\u003cp\u003eFor compatible HART field instruments, the module supports HART Protocol Revision 5.7 over the 4-20 mA output loop. This allows analog control signaling and HART digital communication to share the same current loop. HART operation is distinct from non-HART voltage output configuration and should be considered when defining channel assignments and field-device requirements.\u003c\/p\u003e\n\u003ch3\u003eSystem Integration\u003c\/h3\u003e\n\u003cp\u003eThe TK-HAO081 belongs to the Honeywell Chassis Series A I\/O family. It communicates with the control system through the I\/O ControlNet architecture. Its conformal-coated construction distinguishes it from the corresponding uncoated TC-HAO081 model.\u003c\/p\u003e\n\u003cp\u003eThe module's eight outputs are used to transmit controller commands to compatible field devices. During replacement, the existing I\/O configuration, channel assignments, HART requirements, and termination hardware should be checked against the installed system.\u003c\/p\u003e\n\u003ch3\u003eOutput Response and Protection\u003c\/h3\u003e\n\u003cp\u003eThe module has a 10 ms scan time across all eight channels. Voltage outputs settle to 95% of their final value in less than 8.5 ms. Current output settling time is less than 23 ms without HART and less than 35 ms with HART.\u003c\/p\u003e\n\u003cp\u003eAdditional output characteristics include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVoltage output accuracy: better than 0.1% of range at 25 deg C.\u003c\/li\u003e\n\u003cli\u003eCurrent output accuracy: better than 0.15% of range at 25 deg C.\u003c\/li\u003e\n\u003cli\u003eCurrent output short-circuit limitation: 21 mA or less.\u003c\/li\u003e\n\u003cli\u003eElectronic current limiting for voltage outputs.\u003c\/li\u003e\n\u003cli\u003eOpen-loop current detection for commanded outputs above 0.1 mA.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe 2550 VDC isolation test specification applies between user terminals and the system. It should not be interpreted as evidence of channel-to-channel galvanic isolation; the Honeywell Control Builder reference classifies this module as non-isolated.\u003c\/p\u003e\n\u003ch3\u003eInstallation and Termination\u003c\/h3\u003e\n\u003cp\u003eThe module uses the Honeywell Chassis Series A mounting platform. The documented termination option is the TC-TBNH 20-position terminal block. Remote termination arrangements are also available for Series A analog I\/O, subject to the appropriate cable and termination assembly selection.\u003c\/p\u003e\n\u003cp\u003eThe module receives its operating power through the chassis backplane, while field-side power is provided separately. Verify field loop power, terminal assignments, and the selected voltage or current configuration before connecting field devices.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003eQ: What is the difference between TK-HAO081 and TC-HAO081?\u003c\/p\u003e\n\u003cp\u003eA: Both models belong to the same HART analog output module family. The TK-HAO081 has conformal coating, whereas the TC-HAO081 is the uncoated version.\u003c\/p\u003e\n\u003cp\u003eQ: Can the TK-HAO081 provide both voltage and HART current outputs?\u003c\/p\u003e\n\u003cp\u003eA: It supports voltage and current configurations in non-HART operation. HART-enabled channels use 4-20 mA current output and do not support voltage output in that configuration.\u003c\/p\u003e\n\u003cp\u003eQ: Is the TK-HAO081 suitable for C200E-based systems?\u003c\/p\u003e\n\u003cp\u003eA: Honeywell's Experion LS technical specifications identify CIOM-A I\/O modules as usable with the C200E control processor. The module communicates through the I\/O ControlNet architecture. The installed chassis, controller configuration, and channel assignments should be verified before replacement.\u003c\/p\u003e","brand":"HoneyWell","offers":[{"title":"Default Title","offer_id":41910091841626,"sku":"TK-HAO081","price":184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0612\/4601\/3530\/files\/TK-HAO081.jpg?v=1746682898","url":"https:\/\/www.plcmasters.com\/products\/honeywell-tk-hao081-hart-analog-output-module","provider":"PLC Masters Ltd.","version":"1.0","type":"link"}