ICS Triplex TC-501-02-4M5 Multi-Core I/O Interface Cable
$123.00
$320.00
Description
ICS Triplex TC-501-02-4M5 Multi-Core I/O Interface Cable
Configured for processor-to-termination signal transmission in the ICS Triplex Trusted TMR system, the ICS Triplex TC-501-02-4M5 (TC-501-02-4M5 I/O interface cable) provides a 4.5 m shielded multi-conductor connection between Trusted I/O processor modules and Field Termination Assemblies or marshalling panels. The cable uses internal twisted-pair wiring and overall shielding for separated channel signal transmission.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | TC-501-02-4M5 |
| Brand | ICS Triplex |
| Cable Type | Multi-conductor shielded I/O interface cable |
| System Compatibility | ICS Triplex Trusted TMR system |
| Application Connection | Trusted I/O processor to FTA or marshalling panel |
| Cable Length | 4.5 m |
| Conductor Material | Tinned copper |
| Shielding | Aluminum-Mylar foil and tinned copper braid |
| Outer Jacket Material | Flame-retardant polyurethane / PVC |
| Low Smoke Halogen Free Option | Available according to supplied data |
| Operating Voltage | 24 VDC nominal |
| Operating Temp | -20 deg C to +70 deg C |
| Dimensions | Cable diameter not specified in supplied data |
| Power Consumption | Not applicable; passive cable assembly |
| Connector | Pre-terminated high-density industrial connectors |
| Signal Architecture | Triple-channel TMR signal wiring |
| EMI/RFI Protection | Overall foil and braided shielding |
TMR Signal Isolation and Fail-Safe Wiring
The TC-501-02-4M5 is intended for the signal interface between Trusted TMR processor or I/O hardware and field termination equipment. Internal twisted-pair conductors separate signal paths and reduce coupling between channels.
The cable uses an overall aluminum-Mylar foil shield with a tinned copper braid. This construction provides a conductive shield around the signal conductors and reduces susceptibility to externally coupled EMI and RFI. Shield termination should follow the grounding arrangement specified for the installed Trusted system and FTA assembly.
The cable is used for fault-tolerant signal wiring in Safety Instrumented System, Emergency Shutdown, and Fire and Gas applications. The cable itself does not perform voting logic or fault diagnostics; those functions remain within the associated Trusted control hardware.
Frequently Asked Questions
Q: What is the specified cable length of the TC-501-02-4M5?
A: The specified cable length is 4.5 m.
Q: What shielding construction is specified for this cable?
A: The cable uses an overall aluminum-Mylar foil shield combined with a tinned copper braid.
Q: Is the TC-501-02-4M5 a powered electronic module?
A: No. It is a passive interface cable assembly. The supplied data specifies a 24 VDC nominal operating signal environment but does not assign a power consumption value to the cable.
Field Installation Guidelines
Install the cable between the designated Trusted processor or I/O interface and the corresponding FTA or marshalling connection. Verify connector orientation and pin assignment against the applicable system wiring documentation before energization.
Maintain the specified fixed-installation bending radius of approximately 10 x cable diameter. Avoid sharp bends, crushing, excessive tensile loading, and mechanical strain at the connector bodies.
Route the cable separately from high-current power conductors and other strong electromagnetic noise sources where the installation permits. Maintain the shield continuity through the intended termination points and apply the site grounding scheme specified for the Trusted system.
Before commissioning, inspect the cable jacket, connectors, shield termination, and mechanical routing. Verify conductor continuity and absence of unintended shorts between signal paths according to the applicable maintenance or commissioning procedure.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.