ProSoft MVI56-MNET Modbus TCP/IP Interface Module
$123.00
$320.00
Description
ProSoft MVI56-MNET Modbus TCP/IP Interface Module
Configured for Modbus TCP/IP communication in ControlLogix architectures, the ProSoft MVI56-MNET (MVI56 communication module) provides Ethernet data exchange between the network and ControlLogix backplane.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MVI56-MNET |
| Brand | ProSoft |
| Product Type | Modbus TCP/IP Interface Module |
| Product Line | ControlLogix |
| Network Protocol | TCP/IP |
| Communication Port | Ethernet |
| Ethernet Data Rate | 10/100 Mbps |
| Backplane Current Load | 800 mA at 5 VDC; 3 mA at 24 VDC |
| Independent Server Connections | Up to 10 |
| Service Ports | Port 2000 Encapsulated; Port 502 MBAP |
| Data Memory Mapping | Up to 5000 16-bit registers |
| Status Indicators | APP, ERR, OK LEDs |
| Display | 4-character alphanumeric LED |
| Weight | 3.00 lb |
| Operating Temp | 0 deg C to 60 deg C |
| Storage Temp | -40 deg C to 85 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
| Shock Resistance | 30 G operational; 50 G non-operational |
| Vibration Resistance | 5 G from 10 Hz to 150 Hz |
| Power Consumption | Backplane load: 800 mA at 5 VDC; 3 mA at 24 VDC |
| Recommended RAM | 256 MB recommended; 128 MB minimum |
Ethernet Communication and Protocol Handling
The MVI56-MNET provides Ethernet communication using TCP/IP networking and supports Modbus TCP/IP data exchange. The module supports up to 10 independent server connections through Service Port 2000 and Service Port 502.
Data mapping accommodates up to 5000 16-bit registers, allowing process data to be exchanged between the Ethernet interface and ControlLogix application memory.
The Ethernet interface operates at 10/100 Mbps. Communication status can be monitored through dedicated APP, ERR, and OK LED indicators, while the four-character display provides local diagnostic information.
As a ProSoft communication module, protocol conversion latency depends on network traffic, PLC scan execution, connection loading, and application data mapping. The supplied specifications do not define a fixed numerical latency value.
Frequently Asked Questions
Q: What backplane current does the MVI56-MNET require?
A: The specified backplane current load is 800 mA at 5 VDC and 3 mA at 24 VDC.
Q: How many independent server connections are supported?
A: The module supports up to 10 independent server connections across Service Port 2000 and Service Port 502.
Q: Does the supplied data specify hot-swapping capability?
A: No explicit hot-swap specification is provided. Installation and removal should therefore follow the applicable ControlLogix chassis and module handling procedures.
Field Installation Guidelines
- Install the module in the designated ControlLogix chassis position and verify correct mechanical seating before energizing the system.
- Confirm the backplane power budget can accommodate the specified 800 mA at 5 VDC and 3 mA at 24 VDC load.
- Use an Ethernet cable suitable for the installed industrial environment and maintain physical separation from high-voltage or high-current conductors.
- Route communication wiring away from motor power cables, contactor wiring, and other high-noise sources where practical.
- Maintain cable shielding and grounding according to the plant grounding architecture and applicable Ethernet installation practices.
- Verify Ethernet link configuration and network addressing before enabling Modbus TCP/IP communication.
- Confirm Service Port 2000 and Service Port 502 assignments against the configured application before establishing client connections.
- Check APP, ERR, and OK indicators during commissioning to identify module or application status conditions.
- Use the four-character display together with controller diagnostics when troubleshooting communication or configuration faults.
- Do not exceed the specified environmental limits of 0 deg C to 60 deg C operating temperature and 5% to 95% non-condensing humidity.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.