ProSoft MVI56E-MCMR Modbus Communication Module
$123.00
$320.00
Description
ProSoft MVI56E-MCMR Modbus Communication Module
Configured for Modbus master/slave communication through a 10/100BASE-T interface, the ProSoft MVI56E-MCMR (MVI56E-MCMR Modbus Communication Module) provides protocol communication within a chassis-based control system.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | MVI56E-MCMR |
| Brand | ProSoft |
| Product Type | Modbus Communication Module |
| Communication Mode | Modbus Master/Slave |
| Ethernet Interface | 10/100BASE-T |
| Ethernet Connector | RJ45 |
| Maximum Serial Communication Rate | 115.2 kbit/s |
| Chassis Type | Enhanced chassis compatible |
| Current Consumption at 5 VDC | 800 mA |
| Current Consumption at 24 VDC | 3 mA |
| Weight | 1.15 lb |
| Power Consumption | 4.0 W at 5 VDC, based on specified 800 mA current |
Protocol Conversion and Network Interface
The MVI56E-MCMR provides Modbus master and slave communication for data exchange between connected control devices. Ethernet connectivity uses a 10/100BASE-T interface with an RJ45 connector. The specified communication rate reaches 115.2 kbit/s for supported serial Modbus communication.
The module uses a chassis-based installation arrangement and is identified as an enhanced chassis-compatible communication module. Current requirements are specified separately for the 5 VDC and 24 VDC supply rails.
Frequently Asked Questions
Q: What Ethernet interface does the MVI56E-MCMR provide?
A: The module provides a 10/100BASE-T Ethernet interface through an RJ45 connector.
Q: Does the MVI56E-MCMR support both Modbus master and slave operation?
A: Yes. The supplied specifications identify the module as supporting Modbus master/slave communication.
Q: What are the specified module current requirements?
A: The module is specified at 800 mA on the 5 VDC rail and 3 mA on the 24 VDC rail.
Field Installation Guidelines
Install the module in the designated chassis position according to the applicable chassis installation procedure. Confirm that the chassis power supply can support the specified 5 VDC current requirement before energization.
Route Ethernet communication cables separately from high-current power conductors, motor leads, and switching circuits where practical. Use the specified RJ45 interface and suitable industrial Ethernet cabling for the installation environment.
Maintain proper cable strain relief and connector seating during installation. Do not exceed the supported communication interface specifications or substitute wiring methods that conflict with the equipment installation documentation.
For shielded communication cabling, terminate and bond the shield according to the system grounding design and applicable site standards. Avoid creating unintended ground loops through multiple shield termination paths.
Verify module seating, chassis connections, network link status, and Modbus communication parameters before placing the communication path into service. Firmware compatibility should also be verified against the host chassis and application configuration before any firmware update.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.