ProSoft PLX51-PBM PROFIBUS DP Gateway
$123.00
$320.00
Description
Configured for high-speed protocol translation in Logix-based automation architectures, the ProSoft PLX51-PBM (PLX51-PBM PROFIBUS DP Master/Slave Gateway) provides direct physical/electrical execution between EtherNet/IP networks and PROFIBUS DP field instrumentation.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PLX51-PBM |
| Brand | ProSoft Technology |
| Origin | USA |
| Operating Temp | -20 to +70 deg C |
| Power Consumption | 2.5 W |
| Supply Voltage | 10 to 36 VDC |
| Ethernet Interface | 2 x RJ45 (10/100 Mbps, DLR topology enabled) |
| Fieldbus Interface | 1 x DB9 Female (PROFIBUS DP DPV0/DPV1) |
| Max PROFIBUS Slaves | Up to 125 Slaves (Master mode) |
| PROFIBUS Baud Rate | 9.6 kbps to 12 Mbps (Auto-baud detection) |
Protocol Conversion Latencies & Network Stability
The hardware employs dedicated internal memory buffers to decouple EtherNet/IP backplane cyclic rates from PROFIBUS DP cyclic scan schedules, minimizing cross-protocol conversion latencies to sub-millisecond ranges. Bus stability is maintained across the DB9 physical layer through active signal conditioning, supporting high-speed transmission up to 12 Mbps. Integrated galvanically isolated power circuitry suppresses ground loop interference, while the dual RJ45 switch logic maintains high-availability traffic routing across industrial EtherNet/IP Device Level Ring (DLR) layouts without packet drop or network fragmentation.
Frequently Asked Questions
Q: How does the gateway handle PROFIBUS DP master configuration changes without dropping cyclic Ethernet communications?
A: The gateway stores the PROFIBUS bus configuration internally, allowing it to perform acyclic DPV1 parameter adjustments while continuously serving cached implicit I/O assemblies over EtherNet/IP.
Q: What is the maximum functional current draw required from the external DC power supply?
A: At nominal supply input (24 VDC), the gateway maintains a power consumption profile of approximately 2.5 W, corresponding to an operational current draw below 110 mA under maximum RS-485 bus load.
Q: How does the internal switch handle network loop conditions when deployed in a DLR configuration?
A: The integrated two-port Ethernet hardware natively executes the DLR protocol, preventing network loops by actively terminating or redirecting beacon frames based on ring topology health status.
Field Installation Guidelines
- Mount the unit vertically on a standard 35 mm DIN rail, maintaining at least 25 mm of clear ventilation space above and below the housing.
- Connect the 10 to 36 VDC power wiring to the terminal block using stranded copper conductors rated for a minimum temperature of 75 deg C.
- Ensure the PROFIBUS DB9 cable employs active termination switches enabled at the two physical ends of the RS-485 segment.
- Ground the PROFIBUS shield braid to the functional earth ground terminal via a low-impedance conductor to maximize noise immunity.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.