ProSoft Technology ILX56-PBM PROFIBUS DP Master Communication Module
$123.00
$320.00
Description
ProSoft Technology ILX56-PBM PROFIBUS DP Master Communication Module
Configured for PROFIBUS DP data exchange in Allen-Bradley ControlLogix systems, the ProSoft Technology ILX56-PBM (ILX56-PBM PROFIBUS DP Master Communication Module) provides direct network communication between ControlLogix processors and PROFIBUS DP field devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ILX56-PBM |
| Brand | ProSoft Technology |
| Operating Temp | 0 deg C to 60 deg C |
| Power Consumption | 800 mA at 5.1 VDC; 3 mA at 24 VDC backplane load |
| Module Type | PROFIBUS DP Master Communication Module |
| Host Platform | Allen-Bradley ControlLogix 1756 series chassis |
| PROFIBUS Protocol | PROFIBUS DP-V1 Master, Class 1 and Class 2 |
| Baud Rate | 9.6 kbps to 12 Mbps, with auto-baud detection |
| Supported Slaves | Up to 125 PROFIBUS DP slave devices |
| I/O Data Capacity | Up to 1536 bytes input and 1536 bytes output |
| PROFIBUS Interface | 1 x DB9 female |
| Ethernet Interface | 1 x RJ45 |
| Storage Temp | -40 deg C to 85 deg C |
| Relative Humidity | 5% to 95%, non-condensing |
PROFIBUS Communication and Network Integration
The ILX56-PBM operates as a PROFIBUS DP-V1 Master within ControlLogix 1756 chassis configurations.
It exchanges cyclic I/O data between the ControlLogix backplane and connected PROFIBUS DP slave devices.
The module supports both Class 1 and Class 2 master functions for PROFIBUS DP-V1 communication.
Supported transmission rates range from 9.6 kbps through 12 Mbps with automatic baud-rate detection.
The network interface supports up to 125 PROFIBUS DP slave devices under the specified configuration.
Input and output process data capacity reaches 1536 bytes in each direction.
Configuration can use Studio 5000 or RSLogix 5000 with an applicable Add-On Profile.
The PLX50-PBM Configuration Manager provides an alternative configuration path for PROFIBUS network parameters.
An Ethernet RJ45 interface supports configuration, asset management integration, and remote diagnostic functions.
The PROFIBUS connection uses a DB9 female interface for fieldbus network wiring.
Real-time diagnostic functions provide network status, node health information, and packet statistics.
Frequently Asked Questions
Q: What ControlLogix chassis interface does the ILX56-PBM use?
A: The module installs directly in local or remote Allen-Bradley ControlLogix 1756 chassis configurations.
Q: What backplane electrical load does the module require?
A: The supplied data specifies 800 mA at 5.1 VDC and 3 mA at 24 VDC.
Q: Does the module support automatic PROFIBUS baud-rate detection?
A: Yes. The specified PROFIBUS communication range is 9.6 kbps to 12 Mbps with auto-baud detection.
Field Installation Guidelines
Install the module in an approved ControlLogix 1756 chassis position according to the applicable chassis documentation.
Verify the available backplane current capacity before installing the module within a populated chassis.
Connect the PROFIBUS network through the specified DB9 female interface using compatible PROFIBUS cabling.
Route PROFIBUS wiring separately from high-current power conductors and high-noise switching circuits.
Apply appropriate cable shielding and grounding practices according to the PROFIBUS installation standard.
Terminate the PROFIBUS segment according to the network topology and connected device requirements.
Connect the Ethernet interface only to the intended configuration or diagnostic network.
Verify node addressing, baud-rate operation, and process-data mapping before placing the network into service.
Use the available diagnostic information to check node status and communication statistics during commissioning.
Confirm environmental conditions remain within the specified operating temperature and humidity limits.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.