ProSoft Technology ILX69-PBM PROFIBUS DP Communication Module
$123.00
$320.00
Description
ProSoft Technology ILX69-PBM PROFIBUS DP Communication Module
Configured for PROFIBUS DP communication in CompactLogix and Micro800 systems, the ProSoft Technology ILX69-PBM (ILX69-PBM PROFIBUS DP Communication Module) provides bidirectional data exchange between controllers and PROFIBUS DP devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | ILX69-PBM |
| Brand | ProSoft Technology |
| Product Type | PROFIBUS DP Communication Module |
| Compatible Controllers | CompactLogix 5370 L1, L2, L3; Micro870 via 1769 expansion |
| PROFIBUS Protocol | PROFIBUS DP-V0 / DP-V1 |
| Operating Modes | Master Class 1, Master Class 2, Slave |
| Baud Rate | 9.6 kbps to 12 Mbps, auto-detect |
| Maximum Slave Devices | Up to 125 |
| Input Data Capacity | Up to 1440 bytes |
| Output Data Capacity | Up to 1440 bytes |
| PROFIBUS Port | 1 x DB-9 female |
| Ethernet Port | 1 x RJ45 for diagnostics and configuration |
| Backplane Current Load | 500 mA at 5 VDC; 0 mA at 24 VDC |
| Operating Temp | 0 deg C to 60 deg C |
| Storage Temp | -40 deg C to 85 deg C |
| Relative Humidity | 5% to 95% RH, non-condensing |
| Configuration Software | ProSoft Configuration Builder; Studio 5000 / RSLogix AOP |
| Certifications | CE, cULus, Class I Division 2, ATEX Zone 2 |
| Power Consumption | 500 mA at 5 VDC backplane load |
PROFIBUS Network and Protocol Characteristics
The ILX69-PBM supports PROFIBUS DP-V0 and DP-V1 communication with Master Class 1, Master Class 2, and Slave operation.
The module supports communication speeds from 9.6 kbps through 12 Mbps with automatic baud-rate detection.
The PROFIBUS interface uses a DB-9 female connector for network connection to external DP devices.
The module supports up to 125 connected slave devices and provides up to 1440 bytes of input data.
Output data capacity reaches 1440 bytes, allowing cyclic controller data exchange with PROFIBUS field devices.
An RJ45 Ethernet interface provides diagnostic and configuration access independently of the PROFIBUS network connection.
Frequently Asked Questions
Q: What backplane electrical load does the ILX69-PBM require?
A: The supplied specifications state a 500 mA load at 5 VDC and 0 mA at 24 VDC.
Q: Which PROFIBUS operating modes are supported?
A: The module supports DP-V0 and DP-V1 with Master Class 1, Master Class 2, and Slave operating modes.
Q: Can the module operate across the complete specified PROFIBUS baud-rate range?
A: Yes. The specified communication range is 9.6 kbps to 12 Mbps with automatic baud-rate detection.
Field Installation Guidelines
Install the module in the compatible CompactLogix or Micro800 hardware configuration according to the applicable controller documentation.
Verify that the controller backplane can supply the specified 500 mA at 5 VDC before installation.
Connect the PROFIBUS network through the specified DB-9 interface and maintain the required PROFIBUS cable topology.
Keep PROFIBUS cabling separated from high-current power conductors, motor cables, and switching sources that can introduce electromagnetic interference.
Terminate and shield the PROFIBUS cable according to the network installation standard and the connected device requirements.
Connect cable shields using a controlled grounding arrangement appropriate for the cabinet and site grounding system.
Use the RJ45 Ethernet interface for configuration and diagnostics without substituting it for the PROFIBUS process communication interface.
Verify module recognition, controller configuration, PROFIBUS addressing, baud-rate detection, and cyclic data exchange before placing the system into operation.
Observe the stated operating temperature and humidity limits during cabinet installation and commissioning.
Confirm applicable Class I Division 2 and ATEX Zone 2 installation requirements before installing the module in a hazardous location.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.