ProSoft Technology PLX31-EIP-MBTCP EtherNet/IP to Modbus TCP/IP Gateway
$123.00
$320.00
Description
ProSoft Technology PLX31-EIP-MBTCP EtherNet/IP to Modbus TCP/IP Gateway
Configured for bidirectional protocol conversion between EtherNet/IP and Modbus TCP/IP networks, the ProSoft Technology PLX31-EIP-MBTCP (PLX31-EIP-MBTCP communication gateway) provides direct Ethernet data exchange between industrial controllers and Modbus TCP/IP devices.
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | PLX31-EIP-MBTCP |
| Brand | ProSoft Technology |
| Weight | 2.00 lb |
| Operating Temp | -25 deg C to +70 deg C |
| Storage Temperature | -40 deg C to +85 deg C |
| Power Consumption | 24 VDC @ 200 mA; 10 to 30 VDC @ 400 mA max |
| Power Supply | 10 to 30 VDC |
| Ethernet Ports | 2 x RJ45, 10/100 Mbps, Auto-MDI/MDI-X, shared IP address |
| Protocols | EtherNet/IP and Modbus TCP/IP |
| Mounting | Standard 35 mm DIN rail |
| Enclosure Rating | IP20 |
| Relative Humidity | 5% to 95% RH, non-condensing |
| Vibration | 5 g @ 10 to 150 Hz |
| Operational Shock | 30 g |
| Configuration | ProSoft Configuration Builder |
| Controller Integration | Studio 5000 / RSLogix 5000 AOP and AOI |
| Data Storage | SD card configuration backup |
| Hazardous Area Rating | UL/cUL Class 1 Div. 2, ATEX Zone 2 |
Protocol Conversion and Network Interface
The PLX31-EIP-MBTCP exchanges mapped data between EtherNet/IP controllers and Modbus TCP/IP devices without custom ladder logic for protocol translation. Its two RJ45 Ethernet ports share one IP address, supporting network daisy-chaining while maintaining a single logical Ethernet interface.
The gateway supports EtherNet/IP integration with Rockwell Automation ControlLogix and CompactLogix controllers through Add-On Profiles and Add-On Instructions. ProSoft Configuration Builder provides configuration and diagnostic functions, while the SD card supports local configuration backup for replacement procedures.
Frequently Asked Questions (FAQ)
Q: Can both Ethernet ports use separate IP addresses?
A: No. The supplied specifications identify both RJ45 ports as sharing a single IP address.
Q: What DC supply range does the gateway accept?
A: The specified supply range is 10 to 30 VDC, with a maximum current load of 400 mA.
Q: Is the gateway suitable for DIN-rail installation?
A: Yes. The specified mounting method is a standard 35 mm DIN rail.
Field Installation Guidelines
- Mount the gateway securely on a standard 35 mm DIN rail inside an enclosure appropriate for the specified IP20 protection level.
- Provide a regulated DC supply within the specified 10 to 30 VDC operating range.
- Size the DC power wiring for the specified maximum current load and protect the supply according to the control-panel design.
- Route Ethernet cables separately from high-voltage power wiring and high-current switching conductors where practical.
- Use shielded Ethernet cabling where the installation environment requires additional electromagnetic-noise control.
- Bond cable shields according to the site's industrial grounding scheme and avoid unintended ground-current paths.
- Verify the shared-IP architecture before assigning the gateway address and connecting both Ethernet ports.
- Back up the gateway configuration to the SD card after commissioning and retain the configuration with the panel documentation.
- Confirm EtherNet/IP controller mappings and Modbus TCP/IP register mappings before placing the gateway into service.
- For hazardous-area installations, verify that the complete installation satisfies the applicable UL/cUL Class 1 Div. 2 or ATEX Zone 2 requirements.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.