Описание
Product Description
The Bently Nevada 990-04-XX-01-00 is a compact vibration transmitter engineered for OEMs and end users seeking cost-efficient machinery monitoring solutions. It converts signals from non-contact 3300 XL proximity probes into a 4–20 mA output proportional to vibration amplitude, allowing seamless integration into control systems for compressors, pumps, motors, and fans. Its loop-powered design ensures simple installation in standard control panels.
Technical Specifications
| Specification | Details |
|---|---|
| Input Device | 1 × 3300 XL or 3300 NSv proximity probe with extension cable (available lengths: 5 m, 7 m, 9 m) |
| Output Signal | 4–20 mA, proportional to measured vibration amplitude |
| Measurement Range | 0–10 mils peak-to-peak typical (configurable per OEM needs) |
| Proximity Probe Range | 10–65 mils |
| Power Supply | +12 V to +35 V DC loop-powered (24 V DC typical) |
| Maximum Loop Resistance | 1,000 Ω including cable at 35 V DC |
| Current Limiting | 23 mA typical |
| Mounting | 35 mm DIN rail clips |
| Weight | 1.2 lbs |
| Agency Approvals | Options depend on suffix (XX indicates configurable variants) |
Key Features
-
Direct 4–20 mA Integration: Eliminates need for additional monitoring hardware.
-
OEM-Focused Design: Optimized for small compressors, pumps, motors, and fans.
-
Reliable Vibration Feedback: Converts probe readings into engineering units for protection systems.
-
Flexible Installation: Supports multiple probe and cable lengths for varied machinery layouts.
-
Compact Form Factor: DIN rail mounting simplifies control panel installation.
Applications
-
Centrifugal air compressors for OEM monitoring
-
Small pumps and motors requiring simple vibration feedback
-
Fans and blowers for imbalance or wear detection
-
Industrial OEM machinery where loop-powered, cost-effective vibration transmitters are preferred
FAQ
Q: Can this transmitter work with both 3300 XL and 3300 NSv probes?
A: Yes, it is compatible with either probe type when used with the appropriate extension cable.
Q: What is the maximum cable length supported?
A: Up to 9 m with standard system configurations.
Q: Is the device suitable for DIN rail mounting?
A: Yes, it includes 35 mm DIN rail clips for straightforward panel installation.
Q: What is the expected current draw?
A: Typical current is 23 mA, suitable for standard loop-powered control circuits.
Особенности
Мы приветствуем оптовые заказы и минимальное количество заказа всего одна единица.
По запросу мы можем предоставить всю необходимую документацию, включая сертификаты происхождения/соответствия и другие требуемые экспортные документы.
Для товаров в наличии мы стремимся доставить в течение 1-3 дней после подтверждения оплаты. Товары с указанными сроками поставки будут доставлены согласно заявленному графику.
Мы принимаем 100% оплату T/T (телеграфным переводом) до отправки. Для товаров с длительным сроком изготовления требуется предоплата в размере 30%, оставшиеся 70% оплачиваются перед отправкой. Для переводов в юанях (RMB) свяжитесь с нами, если у вас есть агент в Китае.
Мы предлагаем стандартную годовую гарантию на все новые и оригинальные товары. Если вам нужна расширенная гарантия, пожалуйста, свяжитесь с нами для получения информации о дополнительной стоимости.
Ваше удовлетворение важно для нас. Если вам нужно вернуть товар, это должно быть сделано в течение 30 дней с даты заказа. Продукт должен быть неиспользованным, нераспечатанным и в оригинальной упаковке со всеми включёнными аксессуарами. Возврат средств осуществляется в течение 5-7 рабочих дней после получения возвращённого товара. Обратите внимание, что стоимость доставки и сопутствующие расходы не подлежат возврату.