Açıklama
Overview
The Schneider Electric LC1D32M7 is a 3-pole TeSys Deca contactor rated for 32 A. It is designed for non-reversing motor control in industrial and HVAC applications. The contactor operates with a 220 V AC coil at 50/60 Hz. It supports AC-3, AC-3e, and AC-1 utilization categories for motors and resistive loads. The device features three normally open (NO) main contacts and offers easy installation with multi-standard screws. LC1D32M7 is cULus certified and compatible with auxiliary modules.
Technical Specifications
-
Product Series: TeSys Deca
-
Product Type: Contactor
-
Poles: 3P
-
Rated Operational Current (Ie): 32 A AC-3 at ≤440 V, 50 A AC-1 at ≤440 V
-
Control Circuit Voltage (Uc): 220 V AC 50/60 Hz
-
Motor Power Ratings:
-
7.5 kW at 230 V AC AC-3
-
15 kW at 400 V AC AC-3
-
20 hp at 480 V AC 3-phase
-
25 hp at 600 V AC 3-phase
-
Main Contacts: 3 NO
-
Auxiliary Contacts: 1 NO + 1 NC
-
Rated Short-Circuit Withstand (Icw): 260 A for 10 s, 430 A for 1 s
-
Rated Switching Capacity (Irms): 550 A at ≤440 V AC
-
Mechanical Life: 15 million cycles
-
Electrical Life: 1.65 million cycles at 32 A AC-3
-
Mounting Options: Base plate and DIN rail installation
-
Operating Temperature: -40 to 60 °C (derate to 70 °C)
-
Protection Degree: IP20 front panel
-
Insulation Voltage (Ui): 690 V AC for power circuit
-
Overvoltage Category: III
-
Pollution Degree: 3
-
Coil Operating Range: 0.3–1.1 Uc depending on temperature
-
Power Consumption: 2–5 W depending on utilization category
-
Connection Capacity:
-
Control circuit: 1–4 mm² soft or hard wires
-
Power circuit: 1.5–10 mm² soft or hard wires
-
Torque Rating:
-
Control circuit: 1.7 N·m
-
Power circuit: 2.5 N·m
-
Dimensions: 85 mm height × 45 mm width × 92 mm depth
-
Net Weight: 0.375 kg
-
Standards Compliance: IEC 60947-4-1, IEC 60947-5-1, UL, CSA, CCC, UKCA, EAC, CB
-
Safety Ratings: B10d = 1,369,863 cycles for nominal load, 20 million mechanical cycles
-
Impact & Vibration: Up to 15 gn (closed) and 8 gn (open)
Özellikler
Toplu siparişleri memnuniyetle karşılıyoruz ve minimum sipariş miktarımız sadece bir birimdir.
Talep üzerine, Menşe/ Uygunluk Sertifikaları ve diğer gerekli ihracat belgeleri dahil olmak üzere tüm gerekli belgeleri sağlayabiliriz.
Stokta bulunan ürünler için, ödeme onayından sonra 1-3 gün içinde teslim etmeyi hedefliyoruz. Belirtilen teslim sürelerine sahip ürünler, belirtilen programa göre teslim edilecektir.
Gönderimden önce %100 T/T (Telgraf Transferi) ödemesini kabul ediyoruz. Teslim süresi olan ürünler için %30 depozito önceden alınır, kalan %70 ise gönderimden önce ödenir. RMB transferleri için, Çin'de bir temsilciniz varsa lütfen bizimle iletişime geçin.
Tüm yeni ve orijinal ürünlerde standart bir yıllık garanti sunuyoruz. Uzatılmış garanti talep ediyorsanız, lütfen ek maliyet detayları için bizimle iletişime geçin.
Memnuniyetiniz bizim için önemlidir. Bir ürünü iade etmeniz gerekiyorsa, bu sipariş tarihinden itibaren 30 gün içinde yapılmalıdır. Ürün kullanılmamış, açılmamış ve tüm aksesuarlarıyla birlikte orijinal ambalajında olmalıdır. İadeler, iade edilen ürünü aldıktan sonra 5-7 iş günü içinde işlenir. Lütfen nakliye ve ilgili ücretlerin iade edilmediğini unutmayın.