ABB PM862K02 3BSE081636R1 Redundant Processor Unit

General Info

• Article Number: 3BSE081636R1 (PM862K02)
• Redundancy: Yes
• High Integrity: No
• Clock Frequency: 67 MHz
• Performance (1000 boolean operations): 0.18 ms
• Memory: 32 MB
• RAM for Application: 23.521 MB
• Flash Memory for Storage: Yes

Detailed Data

• Processor Type: MPC866
• Switch-over Time in Redundant Configuration: Max 10 ms
• No. of Applications per Controller: 32
• No. of Programs per Application: 64
• No. of Diagrams per Application: 128
• No. of Tasks per Controller: 32
• No. of Different Cycle Times: 32
• Cycle Time per Application Programs: Down to 1 ms
• Flash PROM for Firmware Storage: 4 MB
• Power Supply: 24 V d.c. (19.2–30 V d.c.)
• Power Consumption (+24 V): Typ: 210 mA, Max: 360 mA
• Power Dissipation: 5.1 W (8.6 W max)
• Redundant Power Supply Status Input: Yes
• Built-in Back-up Battery: Lithium, 3.6V
• Clock Synchronization: 1 ms between AC 800M controllers via CNCP protocol
• Event Queue per OPC Client: Up to 3000 events
• Transmission Speed to OPC Server: 36-86 events/sec, 113-143 data messages/sec
• Comm. Modules on CEX Bus: 12
• Supply Current on CEX Bus: Max 2.4 A
• I/O Clusters on Modulebus (non-red. CPU): 1 electrical + 7 optical
• I/O Clusters on Modulebus (red. CPU): 7 optical
• I/O Capacity on Modulebus: Max 96 (single PM862) or 84 (red. PM862) I/O modules
• Modulebus Scan Rate: 0–100 ms (depends on number of I/O modules)
• Supply Current on Electrical Modulebus: 24 V: Max 1.0 A, 5 V: Max 1.5 A
• Ethernet Channels: 2
• Ethernet Interface: 10 Mbit/s, RJ-45, female (8-pole)
• Control Network Protocol: MMS (Manufacturing Message Service), IAC (Inter Application Communication)
• Recommended Control Network Backbone: 100 Mbit/s switched Ethernet
• Real-time Clock Stability: 100 ppm (approx. 1 h/year)
• RS-232C Interfaces: 2 (1 general, 1 for service tool)
• RS-232C Interface (COM3) [non-red. only]: 75-19,200 baud, RJ-45 female (8-pole), not opto-isolated
• RS-232C Interface (COM4) [non-red. only]: 9,600 baud, RJ-45 female (8-pole), opto-isolated

Environment and Certification

• Operating Temperature: +5 to +55 °C (+41 to +131 °F)
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Temperature Changes: 3 °C/minute (according to IEC/EN 61131-2)
• Pollution Degree: Degree 2 (IEC/EN 61131-2)
• Corrosion Protection: G3 compliant to ISA 71.04
• Relative Humidity: 5–95%, non-condensing
• Emitted Noise: < 55 dB(A)
• Vibration:
  • 10–50 Hz: 0.0375 mm amplitude
  • 50–150 Hz: 0.5 g acceleration
  • 5–500 Hz: 0.2 g acceleration
• Rated Isolation Voltage: 500 V a.c.
• Dielectric Test Voltage: 50 V
• Protection Class: IP20 (EN 60529, IEC 529)
• Altitude: 2000 m (IEC/EN 61131-2)
• Emission & Immunity: EN 61000-6-4, EN 61000-6-2
• Environmental Conditions: Industrial
• CE Mark: Yes
• Electrical Safety: EN 50178, IEC 61131-2, UL 61010-1, UL 61010-2-201
• Hazardous Location: cULus Class 1, Zone 2, AEx nA IIC T4, ExnA IIC T4Gc X
• ISA Secure Certified: Yes
• Marine Certificates: DNV-GL
• TUV Approval: No
• RoHS Compliance: EN 50581:2012
• WEEE Compliance: DIRECTIVE/2012/19/EU

Dimensions

• Width: 119 mm (4.7 in.)
• Height: 186 mm (7.3 in.)
• Depth: 135 mm (5.3 in.)
• Weight (including base):
  • K01: 1200 g (2.6 lbs)
  • K02: 2900 g (6.4 lbs)