Bently Nevada 140734-02 3500/42M Proximitor Seismic Monitor

Description

The Proximitor Seismic Monitor is a sophisticated four-channel monitoring device designed to safeguard industrial machinery. It continuously compares monitored parameters against user-defined alarm setpoints to trigger alerts and communicates critical machine data to both operations and maintenance teams. Capable of accepting inputs from proximity and seismic transducers, the monitor conditions these signals to deliver precise vibration and position measurements. Users can configure each channel via the 3500 Rack Configuration Software to track various parameters, including radial vibration, thrust position, and more.

Specifications

• Inputs:

  • Signal: Accepts 1 to 4 signals from proximity, velocity, or acceleration transducers.
  • Input Impedance: 10 kΩ for Proximitor and acceleration inputs.

• Power Consumption: 7.7 watts.

• Outputs:

  • Front Panel LEDs:
    • OK LED: Indicates proper operation.
    • TX/RX LED: Shows communication status with other 3500 rack modules.
    • Bypass LED: Indicates Bypass Mode status.
  • Buffered Transducer Outputs:
    • Connectors: Coaxial connectors for each channel, short-circuit protected.
    • Output Impedance: 550 Ω.
  • Transducer Power Supply: -24 Vdc.
  • Recorder Outputs:
    • Current: +4 to +20 mA, proportional to full-scale, unaffected by short circuits.
    • Voltage Compliance: 0 to +12 Vdc across a load with resistance from 0 to 600 Ω.
    • Resolution: 0.3662 µA per bit, ±0.25% error at room temperature, ±0.7% over the temperature range.
    • Update Rate: Approximately 100 ms or less.
  • Shaft Absolute Buffered Outputs:
    • Impedance: 300 Ω.
    • Protection: Short-circuit protected.