GE Fanuc IC660BBD024 DC 32-Circuit Source/Sink I/O Block

Overview

The GE Fanuc IC660BBD024 is a 32-circuit Source/Sink I/O Block designed for 12/24 VDC applications. It supports a range of input and output configurations, providing flexibility and reliability in industrial automation systems.

Technical Specifications

• Catalog Numbers:

  • 32 Circuit 12/24 VDC Source I/O Block: IC66*BBD024
  • Terminal Assembly: IC66*TBD024
  • Electronics Assembly: IC66*EBD024
  • 32 Circuit 5/12/24 VDC TTL Sink I/O Block: IC66*BBD025
  • Terminal Assembly: IC66*TBD025
  • Electronics Assembly: IC66*EBD025

• Block Specifications:

  • Size (Height x Width x Depth): 8.83" (22.43 cm) x 3.58" (9.1 cm) x 4.7" (11.94 cm)
  • Weight: 4 lbs. (1.8 kg)
  • LED Indicators (I/O Block): Unit OK, I/O Enabled
  • LED Indicators (Each Circuit): Individual logic side indicators
  • Block to Block Isolation: 850V
  • Heat Dissipation: 11W minimum with 8 inputs, 18W maximum with 32 outputs at 0.5 Amp
  • Operating Voltage (One Source): 10 to 30 VDC (12/24 V supply), 4.9 to 5.3 VDC (5 V supply, sink only)
  • Ripple (Maximum): 10% (12/24 volts), 1% (5 volts)
  • Required DC Power: 150 mA typical / 300 mA maximum
  • Power Supply Dropout Time: 4 ms at 12 volts, 20 ms at 24 volts

• Input Specifications:

  • Input Voltage Relative to DC:
    • Source Blocks:
      • Input ON 12 VDC Supply: 8-12 VDC
      • Input ON 24 VDC Supply: 18-24 VDC
      • Input OFF 12 VDC Supply: 0-6 VDC
      • Input OFF 24 VDC Supply: 0-12 VDC
    • Sink Blocks:
      • Input ON 5 VDC Supply: 0-0.8 VDC
      • Input ON 12 VDC Supply: 0-4 VDC
      • Input ON 24 VDC Supply: 0-6 VDC
      • Input OFF 5 VDC Supply: 2-5 VDC
      • Input OFF 12 VDC Supply: 6-12 VDC
      • Input OFF 24 VDC Supply: 12-24 VDC
  • Input Impedance (Typical): 3.3K Ohms
  • Input Processing Time (Typical): 1.4 ms (plus selectable filter delay)
  • Selectable Input Filter Times: 1, 2, 3, 4, 5, 10, 20, 30, 40, 50, 60, 70, 80, 90, or 100 ms
  • Input Diagnostics: Open wire, Overtemperature, Failed Switch

• Output Specifications:

  • Maximum Output Current (Steady State): 0.5 Amps per circuit
  • Maximum Inrush Current: 4 Amps up to 10 ms (once every 0.5 sec maximum)
  • Block Output Current (Total): 16 Amps
  • Output OFF Leakage Current: 10 µA, maximum
  • Output Turn-On Delay: 0.5 ms, maximum
  • Output Voltage Drop: 2.0 volts maximum at 4 Amps inrush
  • Output Diagnostics: Switch Fault

• Environmental Specifications:

  • Operating Temperature: -0° to +60°C (32° to +140°F)
  • Storage Temperature: -40°C (-40° to +212°F)
  • Humidity: 5% to 95% (non-condensing)
  • Vibration: 5-10 Hz 0.2” (5.08 mm) displacement, 10-200 Hz at 1G