Description
Overview
The Yokogawa ANR11D‑420 S1 is a high-reliability 4–20 mA analog input module designed for integration into Yokogawa Node Interface Units (ANB10D, ANB11D, ANB12D) within CENTUM VP and CENTUM CS 3000 control systems. As part of the I/O Node architecture, it converts field analog signals into digital data, providing precise, isolated inputs to the Field Control Unit (FCU) for real-time process control.
This module is engineered for mission-critical industrial operations, offering robust signal isolation, continuous diagnostics, and seamless communication with redundant or standard node configurations.
Technical Specifications
General Information
| Parameter | Specification |
|---|---|
| Model | ANR11D‑420 S1 |
| Module Type | Analog Input (4–20 mA) |
| Node Type | Node Interface Unit Module |
| Compatible Systems | CENTUM VP, CENTUM CS 3000 |
| Installed In | ANB10D, ANB11D, ANB12D |
| Manufacturer | Yokogawa Electric Corporation |
| Hardware/Firmware Revision | S1 |
Electrical Characteristics
-
Input Signal: 4–20 mA
-
Typical Channels: 8–16 per module
-
Input Burden: Low (minimizes transmitter loading)
-
Accuracy: ±0.1% FS (typical)
-
Isolation: Channel-to-channel, Channel-to-system, optical/electrical
-
Diagnostics: Open-circuit detection, range validation, module health monitoring
Node Interface Integration
-
Communication via ANB-series backplane
-
Redundant node operation support
-
Online replacement in redundant configurations
-
Compatible with marshalling and terminal boards (TBT, TERT, TE16 series)
Environmental Conditions
| Parameter | Specification |
|---|---|
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | −20°C to 85°C |
| Relative Humidity | 5–95% RH, non-condensing |
| EMI/EMC Compliance | Industrial-grade |
| Vibration Resistance | Cabinet-level suitable |
Mechanical Features
-
Form Factor: Plug-in I/O module
-
Mounting: ANB-series Node Interface Unit
-
Cooling: Passive convection
Applications
-
4–20 mA signal acquisition from pressure, temperature, flow, and level transmitters
-
Analytical and laboratory instrument integration
-
Real-time process monitoring in DCS control loops
-
Industrial control requiring precise and isolated analog inputs
FAQ / Similar Models
Q: Can the module operate in a redundant node setup?
A: Yes, it supports online replacement and full operation in redundant node configurations.
Q: What are the alternatives for higher channel density?
A: The ANR16D series supports 16-channel analog inputs with similar isolation and diagnostic features.
Q: Can it interface directly with field transmitters?
A: Yes, it is designed to interface with 4–20 mA transmitters via standard Yokogawa Node Units.
Features
Ми вітаємо оптові замовлення і маємо мінімальну кількість замовлення всього в одну одиницю.
За запитом ми можемо надати всю необхідну документацію, включаючи Сертифікати походження/відповідності та інші необхідні експортні документи.
Для товарів на складі ми прагнемо доставити протягом 1-3 днів після підтвердження оплати. Товари з вказаними термінами виконання будуть доставлені відповідно до зазначеного графіка.
Ми приймаємо 100% оплату T/T (телеграфним переказом) перед відправкою. Для товарів з термінами виготовлення потрібен аванс у розмірі 30%, решта 70% сплачується перед відправкою. Для переказів у RMB, будь ласка, зв'яжіться з нами, якщо у вас є агент у Китаї.
Ми пропонуємо стандартну однорічну гарантію на всі нові та оригінальні товари. Якщо вам потрібна розширена гарантія, будь ласка, зв'яжіться з нами для отримання додаткової інформації про вартість.
Ваша задоволеність важлива для нас. Якщо вам потрібно повернути товар, це має бути зроблено протягом 30 днів з дати замовлення. Продукт повинен бути не використаним, не відкритим і в оригінальній упаковці з усіма включеними аксесуарами. Повернення коштів обробляються протягом 5-7 робочих днів після отримання поверненого товару. Зверніть увагу, що вартість доставки та пов'язані з нею збори не підлягають поверненню.