ABB Brings Industrial Robot Automation into Clinical Laboratory Workflows
Medical laboratories are under increasing pressure to process more samples, shorten turnaround times, and maintain consistent testing procedures despite shortages of skilled personnel. These challenges become more demanding in hospital laboratories operating around the clock, where repetitive sample preparation and handling tasks can consume a considerable amount of technicians' working time.
ABB has addressed these requirements through a collaborative automation project with MVZ Medizinische Labore Dessau Kassel GmbH in Germany. The resulting system, known as Lab Table II, uses two cleanroom-qualified ABB IRB 1300 industrial robots to automate blood sample handling throughout the pre-analytical and post-analytical stages.
The project demonstrates how industrial robotics can be adapted to environments traditionally dominated by laboratory equipment and manual operations. Rather than replacing laboratory instruments, the robots coordinate sample movement between different processing stations, creating a more standardized workflow.
Addressing Labor Shortages and Increasing Sample Throughput
MVZ Medizinische Labore Dessau Kassel GmbH, part of the Limbach Group, provides laboratory services to hospitals, clinics, outpatient facilities, and medical practitioners across Germany. Its operations involve more than 300 employees, processing over 1.8 million orders and approximately 8.5 million laboratory tests annually.
Although large diagnostic laboratories often deploy Total Laboratory Automation (TLA) systems, smaller hospital laboratories face different investment and space constraints. Facilities with capacities of up to 600 beds may not have the resources or operational requirements to justify extensive centralized automation systems.
MVZ therefore worked with ABB to develop a compact and cost-effective solution that could automate routine sample handling without requiring a large-scale laboratory automation infrastructure.
The objective was to establish a self-contained system capable of operating continuously, 24 hours a day and 365 days a year. Lab Table II achieves a processing capacity of up to 160 samples per hour, covering sample reception, preparation, centrifugation, instrument feeding, and subsequent archiving.
From an automation engineering perspective, the significance of this project lies in its system-level design. The main challenge is not simply moving sample tubes with robots, but coordinating multiple operations, identifying individual samples correctly, and maintaining process continuity across different laboratory instruments.
Two ABB IRB 1300 Robots Coordinate the Entire Process
The central components of Lab Table II are two ABB IRB 1300 industrial robots in cleanroom configurations, installed on an automated laboratory workbench.
Their responsibilities are divided across the sample preparation and handling sequence. Laboratory personnel initially place blood samples into designated racks on the workbench. Once the samples enter the automated workflow, the robots take over the repetitive handling operations.
The first robot identifies the required sample and transfers it into a centrifuge cup when centrifugation is necessary. Samples that do not require centrifugation are transferred directly into the appropriate instrument racks.
The second robot supports centrifuge balancing by inserting compensation tubes. After centrifugation, it also transfers both processed and unprocessed samples into the designated racks for laboratory analysis.
Following completion of the analysis, sensors notify the automation system when the corresponding racks are ready for collection. The robot then removes the samples, reseals the tubes, and transfers them to the archiving area.
This division of tasks allows both robots to coordinate several operations within a compact working environment.
The ABB IRB 1300 was selected partly because of its movement speed, repeatability, positioning accuracy, and 1.40-meter reach. These characteristics support the handling of samples across multiple workstations without requiring a separate robot for every individual operation.
Camera-Based Identification Ensures Sample Traceability
In clinical laboratory automation, sample identification is just as important as mechanical handling. A robot may perform every movement correctly, but an incorrectly identified tube can still compromise the entire testing workflow.
Lab Table II addresses this requirement through camera-based identification. The vision system reads the color of each sample cap to distinguish sample categories, such as serum and anticoagulated blood. It also scans the identification number printed on the tube.
The identification information determines how each sample should be processed. The corresponding analysis requests are retrieved from the internal Laboratory Information System (LIS) and communicated to the relevant laboratory instruments.
Samples with identification discrepancies are automatically separated and placed in a designated error rack. Tubes without readable identification numbers are transferred to a separate area for another scanning attempt.
This arrangement creates a controlled exception-handling process instead of allowing uncertain samples to continue through the normal workflow.
An important engineering consideration here is the integration of machine vision, laboratory information systems, robotic handling, and instrument communication. These components must work together to maintain sample identity throughout the process. In practice, this type of coordination is what distinguishes a complete laboratory automation solution from a conventional robotic pick-and-place application.
SafeMove Enables Human-Robot Collaboration Without Physical Enclosures
One of the more interesting aspects of the Lab Table II installation is its approach to personnel safety.
Unlike many conventional industrial robot installations, the two ABB IRB 1300 robots operate without a fully enclosed physical housing. Laboratory technicians can approach the automated workbench and analyzers while the robots continue performing their assigned tasks.
This arrangement is supported by ABB SafeMove, a safety-certified robot monitoring solution. Sensors monitor movement within predefined safety zones around the automation equipment.
When a person enters the monitored area, the robots reduce their speed to a predefined safe level. Once the person leaves the area, the robots can accelerate again according to the configured safety functions.
This approach allows laboratory personnel to access nearby equipment without unnecessarily interrupting the automated workflow.
From an industrial safety perspective, this application illustrates an important distinction between collaborative operation and simply installing a robot in an open workspace. Safe human-robot interaction requires a properly engineered safety concept, including monitored zones, validated stopping and speed functions, and a risk assessment based on the actual installation.
SafeMove provides the safety-related monitoring functions, while the overall installation must still be designed and validated according to the applicable machinery and workplace safety requirements.
Automation Improves Productivity and Laboratory Working Conditions
The operational results highlight the practical benefits of automating repetitive sample handling.
According to MVZ, Lab Table II processes up to 160 samples per hour and reduces processing time by approximately 25% compared with the previous workflow. Its continuous operating capability also reduces dependence on manual handling during routine laboratory operations.
For laboratory technicians, the most immediate benefit is the reduction of repetitive tasks such as transferring tubes, loading centrifuges, arranging instrument racks, and preparing samples for storage.
Instead of spending substantial time on these activities, employees can concentrate on more demanding laboratory work and tasks that require professional judgment.
The system also improves workflow consistency by following defined sample identification, handling, and routing procedures. This is particularly valuable in laboratories operating across multiple shifts, where standardizing repetitive processes can help reduce variations between working periods.
However, throughput alone should not be treated as the only measure of success. In laboratory environments, sample traceability, correct instrument assignment, exception handling, and process availability are equally important. A high-speed robotic system must maintain these functions while handling different sample types and responding to unexpected conditions.
A Practical Automation Model for Small and Medium-Sized Hospitals
Lab Table II represents a useful example of how industrial automation technologies can be transferred into specialized medical applications.
Traditional laboratory automation projects often focus on large facilities with extensive instrument networks and high sample volumes. MVZ and ABB have demonstrated an alternative approach: using a compact robotic workbench to automate selected stages of the laboratory process without requiring a complete centralized automation infrastructure.
This model could be relevant to smaller and medium-sized hospital laboratories that need to improve productivity but have limited installation space, staffing resources, or investment budgets.
Another important consideration is scalability. A modular automation concept can provide a starting point for laboratories that want to automate repetitive operations gradually rather than replacing their entire existing infrastructure.
Nevertheless, successful deployment depends on more than robot selection. Laboratory information system integration, sample identification accuracy, instrument compatibility, process validation, contamination control, and personnel safety must all be considered during system design.
ABB and MVZ Demonstrate the Expanding Role of Industrial Robotics in Healthcare
The Lab Table II project was completed through approximately one year of collaboration between ABB and the MVZ team. It demonstrates how established industrial robotics technologies can be adapted to the specific requirements of clinical laboratory operations.
Max Novotny, Sales & Business Development Manager at ABB Robotics, highlighted the role of the SafeMove concept in enabling industrial robots to operate in a collaborative laboratory environment without physical enclosures.
Dr. Juliane Böttcher-Lorenz, Managing Director and Medical Director of MVZ, also emphasized the value of transferring industrial automation experience into medical laboratory processes.
More broadly, this application reflects a growing direction in industrial automation: robots are no longer limited to traditional manufacturing lines, material handling, and machine tending. Their ability to perform repeatable movements, coordinate multiple process steps, and interact with other automated equipment makes them increasingly relevant to healthcare and laboratory operations.
For system integrators and automation engineers, the key lesson is that successful automation begins with understanding the complete process rather than focusing on individual machines. In Lab Table II, the combination of robotic handling, machine vision, information system integration, and safety monitoring creates value that no single component could deliver independently.
As laboratory staffing pressures continue and diagnostic workloads increase, compact robotic systems such as this may become an increasingly practical option for hospitals seeking to standardize routine operations while making better use of skilled personnel.
