ABB AO810V2 3BSE038415R1 Analog Output Module

Overview

General Information

• Article Number: 3BSE038415R1
• Type: Analog Output
• Signal Specification: 0..20 mA, 4..20 mA
• Number of Channels: 8
• HART: No
• SOE: No
• Redundancy: No
• High Integrity: No
• Intrinsic Safety: No
• Mechanics: S800

Detailed Data

• Resolution: 14-bit
• Isolation: Groupwise isolated from ground
• Under/Over Range: - / +15%
• Output Load:
  • ≤ 500 Ω (supply connected to L1+ only)
  • 250 - 850 Ω (with supply connected to L2+ only)
• Error: Max. 0.1% at 0 - 500 ohms (current)
• Temperature Drift:
  • Typ. 30 ppm/°C
  • Max. 60 ppm/°C
• Rise Time: 0.35 ms (PL = 500 Ω)
• Update Cycle Time: ≤ 2 ms
• Current Limiting: Short circuit proof, current-limited output
• Maximum Field Cable Length: 600 meters (656 yards)
• Rated Insulation Voltage: 50 V
• Dielectric Test Voltage: 500 V a.c.
• Power Dissipation: 2.3 W
• Current Consumption +5 V Modulebus: Max 70 mA
• Current Consumption +24 V Modulebus: 0
• Current Consumption +24 V External: 245 mA

Diagnostics

• Front LEDs:
  • F(ault)
  • R(un)
  • W(arning)
  • O(SP)
• Supervision:
  • Module Error: Output power low
  • Channel Error: Open circuit (for current > 1 mA)
• Status Indication of Supervision:
  • Module Error
  • Module Warning
  • Channel Error

Environment and Certification

• CE Mark: Yes
• Electrical Safety:
  • EN 61010-1
  • UL 61010-1
  • EN 61010-2-201
  • UL 61010-2-201
• Hazardous Location:
  • C1 Div 2 cULus
  • C1 Zone 2 cULus
  • ATEX Zone 2
• Marine Certification: ABS, BV, DNV, LR
• Operating Temperature: 0 to +55 °C (+32 to +131 °F)
• Storage Temperature: -40 to +70 °C (-40 to +158 °F)
• Pollution Degree: Degree 2, IEC 60664-1
• Corrosion Protection: ISA-S71.04: G3
• Relative Humidity: 5 to 95%, non-condensing
• Max Ambient Temperature: 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
• Protection Class: IP20 according to IEC 60529
• Mechanical Operating Conditions: IEC/EN 61131-2
• EMC: EN 61000-6-4 and EN 61000-6-2
• Overvoltage Categories: IEC/EN 60664-1, EN 50178
• Equipment Class: Class I according to IEC 61140 (earth protected)
• RoHS Compliance: DIRECTIVE/2011/65/EU (EN 50581:2012)
• WEEE Compliance: DIRECTIVE/2012/19/EU

Compatibility

• Use with MTU: TU810, TU812, TU814, TU830, TU833
• Keying Code: AE

Dimensions

• Width: 45 mm (1.77”)
• Depth: 102 mm (4.01”), 111 mm (4.37”) including connector
• Height: 119 mm (4.7”)
• Weight: 0.18 kg (0.4 lbs.)