ABB PM864AK01 3BSE018161R1 System 800xA Hardware Selector

Overview

• Hardware selector module for ABB's System 800xA
• Central control point for I/O modules and communication interfaces

Technical Specifications

General

• Article Number: 3BSE018161R1 (PM864AK01)
• Life Cycle Status: Classic
• Redundancy: Yes
• High Integrity: No
• Clock Frequency: 96 MHz
• Performance (1000 boolean operations): 0.15 ms
• Memory: 32 MB
• RAM available for application: 23.522 MB
• Flash memory for storage: Yes

Detailed Data

• Processor Type: MPC862
• Switch Over Time (in red. conf. max): 10 ms
• No. of applications per controller: 32
• No. of programs per application: 64
• No. of diagrams per application: 128
• No. of tasks per controller: 32
• Number of different cycle times: 32
• Cycle time per application programs: Down to 1 ms
• Flash PROM for firmware storage: 2 MB
• Power supply: 24 V DC (19.2-30 V DC)
• Power consumption +24 V typ/max: 287/487 mA
• Power dissipation typ. max: 6.9 W (11.4 W max)
• Redundant power supply status input: Yes
• Built-in back-up battery: Lithium, 3.6 V
• Clock synchronization: 1 ms between AC 800M controllers by CNCP protocol
• Event queue in controller per OPC client: Up to 3000 events
• AC 800M transm. speed to OPC server: 36-86 events/sec, 113-143 data messages/sec
• Comm. modules on CEX bus: 12
• Supply current on CEX bus: Max 2.4 A
• I/O clusters on Modulebus with non-red. CPU: 1 electrical + 7 optical
• I/O clusters on Modulebus with red. CPU: 0 electrical + 7 optical
• I/O capacity on Modulebus: Max 96 (single PM864A) or 84 (red. PM864A) I/O modules
• Modulebus scan rate: 0 - 100 ms
• Supply current on Electrical Modulebus: 24 V : max 1.0 A, 5 V : max 1.5 A
• Ethernet channels: 2
• Ethernet interface: Ethernet (IEEE 802.3), 10 Mbit/s, RJ-45, female (8-pole)
• Control Network protocol: MMS (Manufacturing Message Service) and IAC (Inter Application Communication)
• Recommended Control Network backbone: 100 Mbit/s switched Ethernet
• Real-time clock stability: 100 ppm (approx. 1 h/year)
• RS-232C interface: 2 (one general, 1 for service tool)
• RS-232C interface (COM3) (non red. only): 75-19 200 baud, RJ-45 female (8-pole)
• RS-232C interface (COM4) (non red. only): 9 600 baud, RJ-45 female (8-pole)

Environment and Certification

• Temperature, Operating: +5 to +55 °C (+41 to +131 °F)
• Temperature, Storage: -40 to +70 °C (-40 to +158 °F)
• Temperature changes: 3 °C/minutes according to IEC/EN 61131-2
• Pollution degree: Degree 2 according to IEC/EN 61131-2
• Corrosion protection: G3 compliant to ISA 71.04
• Relative humidity: 5 to 95 %, non-condensing
• Emitted noise: < 55 dB
• Vibration: 10 < f < 50 Hz: 0.0375 mm amplitude, 50 < f < 150 Hz: 0.5 g acceleration, 5 < f < 500 Hz: 0.2 g acceleration
• Rated Isolation Voltage: 500 V a.c.
• Dielectric test voltage: 50 V
• Protection class: IP20 according to EN 60529, IEC 529
• Altitude: 2000 m according to IEC/EN 61131-2
• Emission & Immunity: EN 61000-6-4, EN 61000-6-2
• Environmental conditions: Industrial
• CE Mark: Yes
• Electrical Safety: EN 50178, IEC 61131-2, UL 508
• Hazardous location: UL 60079-15
• Marine certificates: ABS, BV, DNV-GL, LR (PM864AK01, PM864AK02)
• TUV Approval: No
• RoHS compliance: -
• WEEE compliance: DIRECTIVE/2012/19/EU

Dimensions

• Width: 196 mm (7.3 in)
• Height: 119 mm (4.7 in)
• Depth: 135 mm (5.3 in)
• Weight (including base): 1200 g (2.6 lbs)