Phoenix Contact QUINT-PS/1AC/24DC/10 Power Supply Unit

Overview

• Type: Primary-switched power supply unit
• Series: QUINT POWER
• Connection Type: Screw connection
• Mounting: DIN rail mounting
• Technology: SFB Technology (Selective Fuse Breaking)
• Input: 1-phase
• Output: 24 V DC / 10 A

Input Specifications

AC Operation:

• Nominal Input Voltage Range: 100 V AC ... 240 V AC (-15 % / +10 %)
• Input Voltage Range: 85 V AC ... 264 V AC
• Derating IStat. Boost: < 100 V AC (1 %/V)
• Input Voltage Range DC: 110 V DC ... 350 V DC (typ. 90 V DC, UL 508: ≤ 300 V DC)
• Electric Strength, Max.: 300 V AC
• Typical National Grid Voltage: 120 V AC / 230 V AC
• Voltage Type: AC
• Inrush Current: < 15 A
• Inrush Current Integral (I2t): < 1.5 A²s
• Inrush Current Limitation: 15 A
• AC Frequency Range: 45 Hz ... 65 Hz
• Frequency Range DC: 0 Hz
• Mains Buffering Time: > 36 ms (120 V AC) / > 36 ms (230 V AC)
• Current Consumption: 4 A (100 V AC) / 1.7 A (240 V AC)
• Nominal Power Consumption: 302 VA
• Protective Circuit: Transient surge protection; Varistor, gas-filled surge arrester
• Power Factor (cos φ): 0.85
• Typical Response Time: < 0.15 s
• Input Fuse: 10 A (slow-blow, internal)
• Permissible Backup Fuse: B10 B16 AC
• Permissible DC Backup Fuse: Connect a suitable fuse upstream
• Recommended Breaker for Input Protection: 10 A ... 20 A (Characteristics B, C, D, K)
• Discharge Current to PE: < 3.5 mA

DC Operation:

• Nominal Input Voltage Range: 110 V DC ... 250 V DC (-10 % ... +40 %, UL 508: ≤ 300 V DC)
• Input Voltage Range: 110 V DC ... 350 V DC
• Derating IStat. Boost: < 110 V DC (1 %/V)
• Current Consumption: 3.4 A (110 V DC) / 1.5 A (250 V DC)

Output Specifications

• Efficiency:
  • Typ. 92 % (120 V AC)
  • Typ. 93.2 % (230 V AC)
• Output Characteristic: U/I
• Nominal Output Voltage: 24 V DC ±1 %
• Setting Range of the Output Voltage (USet): 18 V DC ... 29.5 V DC (> 24 V DC, constant capacity restricted)
• Nominal Output Current (IN): 10 A
• POWER BOOST (IBoost): 15 A (-25 °C ... 40 °C permanent, UOUT = 24 V DC)
• Static Boost (IStat.Boost): 15 A
• Selective Fuse Breaking (ISFB): 60 A (12 ms)
• Magnetic Circuit Breaker Tripping: B2 / B4 / B6 / C2 / C4
• Derating: 60 °C ... 70 °C (2.5 %/K)
• Feedback Voltage Resistance: ≤ 35 V DC
• Protection Against Overvoltage at the Output (OVP): ≤ 35 V DC
• Control Deviation:
  • < 1 % (change in load, static 10 % ... 90 %)
  • < 2 % (change in load, dynamic 10 % ... 90 %)
  • < 0.1 % (change in input voltage ±10 %)
• Residual Ripple: < 50 mVPP (with nominal values)
• Short-Circuit-Proof: Yes
• Output Power: 240 W / 360 W
• Maximum No-Load Power Dissipation: 9.1 W
• Power Loss Nominal Load Max.: 22 W
• Rise Time: < 0.05 s (UOUT (10 % ... 90 %))
• Connection in Parallel: Yes, for redundancy and increased capacity
• Connection in Series: Yes

Signal: DC OK Active:

• Output Description: UOUT > 0.9 x UN: High signal
• Switching Voltage Range: 18 V DC ... 24 V DC
• Maximum Inrush Current: ≤ 20 mA (short-circuit-proof)
• Continuous Load Current: ≤ 20 mA

Signal: DC OK Floating:

• Output Description: Relay contact, UOUT > 0.9 x UN: Contact closed
• Maximum Switching Voltage: 30 V AC / 24 V DC
• Maximum Inrush Current: 0.5 A / 1 A
• Continuous Load Current: ≤ 1 A

Signal: POWER BOOST, Active:

• Output Description: IOUT < IN: High signal
• Switching Voltage Range: 18 V DC ... 24 V DC
• Output Voltage: + 24 V DC
• Maximum Inrush Current: 20 mA (short-circuit-proof)
• Continuous Load Current: ≤ 20 mA

Dimensions

• Width: 60 mm
• Height: 130 mm
• Depth: 125 mm

Installation Dimensions:

• Installation Distance Right/Left: 5 mm / 5 mm
• Installation Distance Top/Bottom: 50 mm / 50 mm

Alternative Assembly Dimensions:

• Width: 122 mm
• Height: 130 mm
• Depth: 63 mm