1783-ETAPK Allen-Bradley EtherNet/IP Tap Kit
$123.00
$320.00
Description
Allen-Bradley 1783-ETAPK EtherNet/IP Tap Kit
Configured for EtherNet/IP traffic monitoring in industrial Ethernet networks, the Allen-Bradley 1783-ETAPK (1783-ETAPK EtherNet/IP Tap Kit) provides passive signal access through three copper RJ45 ports for communication diagnostics and network analysis without interrupting controller-to-device data exchange.
Suffix Breakdown & Model Matrix
| Model Element | Specification |
|---|---|
| 1783 | Allen-Bradley Stratix industrial Ethernet product family |
| ETAPK | EtherNet/IP Tap Kit configuration |
| Product Function | Passive Ethernet traffic monitoring and diagnostic access |
| Network Interface | Three copper RJ45 10/100BASE-TX ports |
Hardware Specifications
| Parameter | Specification |
|---|---|
| Model | 1783-ETAPK |
| Brand | Allen-Bradley |
| Origin | United States |
| Weight | 2.01 lbs |
| Dimensions | 118 x 87 x 58 mm |
| Operating Temp | -25 to +70 deg C |
| Power Consumption | <= 3 W |
| Product Type | EtherNet/IP Tap Kit |
| Port Configuration | 3 x RJ45 10/100BASE-TX copper ports |
| Protocol Support | EtherNet/IP, CIP, TCP/IP, UDP/IP |
| Switching Method | Store-and-forward |
| Power Supply | 24 VDC nominal (20.4 to 27.6 VDC) |
| Current Consumption | Maximum 125 mA at 24 VDC |
| Isolation Voltage | 30 V continuous; type tested at 1250 VDC for 60 s |
| Enclosure Rating | Open-style, IP20 |
| Mounting Method | DIN rail mounting |
| Certifications | UL, cUL, CE, ATEX Zone 2, IECEx |
EtherNet/IP Deterministic Network Diagnostics
The 1783-ETAPK operates within Allen-Bradley EtherNet/IP deterministic networks by providing passive access to Ethernet communication frames. The tap kit supports controller and device communication analysis through mirrored traffic monitoring without modifying the network data path.
The three-port copper interface supports 10/100BASE-TX communication and EtherNet/IP protocol traffic including CIP messaging. The module architecture supports firmware compatibility requirements within Stratix Ethernet infrastructure and allows integration with industrial network diagnostic tools.
Frequently Asked Questions
Q: Does the 1783-ETAPK interrupt normal EtherNet/IP communication during monitoring?
A: The EtherNet/IP Tap Kit provides passive monitoring access and is designed to observe network traffic without disrupting the primary communication path.
Q: What type of Ethernet connection is supported by the module?
A: The module uses three copper RJ45 ports supporting 10/100BASE-TX Ethernet connections.
Q: What power supply range is required for operation?
A: The module requires a 24 VDC supply with an operating range of 20.4 to 27.6 VDC.
Field Installation Guidelines
Install the 1783-ETAPK on a DIN rail mounting surface inside an enclosure suitable for the IP20 open-style construction. Use Category 5e or higher Ethernet cabling following applicable TIA/EIA wiring standards.
Route Ethernet communication cables separately from high-voltage power wiring to minimize electromagnetic interference. Maintain proper shield termination practices where shielded cables are applied.
Verify 24 VDC power polarity before connection. Tighten power connector terminals according to the specified installation torque requirement. Confirm link status and traffic visibility through the connected diagnostic equipment after commissioning.
Features
Minimum Order Quantity (MOQ)
We welcome bulk orders and have a minimum order quantity of just one unit.
Certificates and Documentation
Upon request, we can provide all necessary documentation, including Certificates of Origin/Conformance and other required export documents.
Delivery Time
For items in stock, we aim to deliver within 1-3 days after payment confirmation. Items with specified lead times will be delivered according to the quoted schedule.
Payment Methods
We accept 100% T/T (Telegraphic Transfer) payment before shipping. For items with lead times, a 30% deposit is required upfront, with the remaining 70% due before shipment. For RMB transfers, please contact us if you have an agent in China.
Warranty
We offer a standard one-year warranty on all new and original items. If you require an extended warranty, please contact us for additional cost details.
Refund and Return Policy
Your satisfaction is important to us. If you need to return an item, it must be done within 30 days of the order date. The product must be unused, unopened, and in its original packaging with all accessories included. Refunds are processed within 5-7 business days after we receive the returned item. Please note that shipping and related charges are non-refundable.
Featured
Complementary products
Express Delivery
Fast shipping for your urgent needs.
Large Inventory
Extensive stock ensures quick availability.
Premium Quality
Genuine, high-grade PLC & DCS components.
24/7 Customer Support
Reliable service for clients worldwide.