Description
Product Description
The Bently Nevada 990-04-XX-01-00 is a compact vibration transmitter engineered for OEMs and end users seeking cost-efficient machinery monitoring solutions. It converts signals from non-contact 3300 XL proximity probes into a 4–20 mA output proportional to vibration amplitude, allowing seamless integration into control systems for compressors, pumps, motors, and fans. Its loop-powered design ensures simple installation in standard control panels.
Technical Specifications
| Specification | Details |
|---|---|
| Input Device | 1 × 3300 XL or 3300 NSv proximity probe with extension cable (available lengths: 5 m, 7 m, 9 m) |
| Output Signal | 4–20 mA, proportional to measured vibration amplitude |
| Measurement Range | 0–10 mils peak-to-peak typical (configurable per OEM needs) |
| Proximity Probe Range | 10–65 mils |
| Power Supply | +12 V to +35 V DC loop-powered (24 V DC typical) |
| Maximum Loop Resistance | 1,000 Ω including cable at 35 V DC |
| Current Limiting | 23 mA typical |
| Mounting | 35 mm DIN rail clips |
| Weight | 1.2 lbs |
| Agency Approvals | Options depend on suffix (XX indicates configurable variants) |
Key Features
-
Direct 4–20 mA Integration: Eliminates need for additional monitoring hardware.
-
OEM-Focused Design: Optimized for small compressors, pumps, motors, and fans.
-
Reliable Vibration Feedback: Converts probe readings into engineering units for protection systems.
-
Flexible Installation: Supports multiple probe and cable lengths for varied machinery layouts.
-
Compact Form Factor: DIN rail mounting simplifies control panel installation.
Applications
-
Centrifugal air compressors for OEM monitoring
-
Small pumps and motors requiring simple vibration feedback
-
Fans and blowers for imbalance or wear detection
-
Industrial OEM machinery where loop-powered, cost-effective vibration transmitters are preferred
FAQ
Q: Can this transmitter work with both 3300 XL and 3300 NSv probes?
A: Yes, it is compatible with either probe type when used with the appropriate extension cable.
Q: What is the maximum cable length supported?
A: Up to 9 m with standard system configurations.
Q: Is the device suitable for DIN rail mounting?
A: Yes, it includes 35 mm DIN rail clips for straightforward panel installation.
Q: What is the expected current draw?
A: Typical current is 23 mA, suitable for standard loop-powered control circuits.
Features
Dobrodošli su nam veleprodajni nalozi i imamo minimalnu količinu narudžbine od samo jedne jedinice.
Na zahtev, možemo obezbediti svu potrebnu dokumentaciju, uključujući Sertifikate o poreklu/usaglašenosti i druge potrebne izvozničke dokumente.
Za artikle na lageru, cilj nam je da isporučimo u roku od 1-3 dana nakon potvrde uplate. Artikli sa navedenim rokovima isporuke biće isporučeni u skladu sa navedenim rasporedom.
Prihvatamo 100% T/T (telegrafski transfer) plaćanje pre slanja. Za artikle sa vremenom isporuke, zahteva se avans od 30%, dok se preostalih 70% plaća pre slanja. Za RMB transfere, molimo kontaktirajte nas ako imate agenta u Kini.
Нудимо стандардну једногодишњу гаранцију на све нове и оригиналне артикле. Ако вам је потребна продужена гаранција, молимо контактирајте нас за детаље о додатним трошковима.
Vaše zadovoljstvo nam je važno. Ako treba da vratite artikal, to mora biti urađeno u roku od 30 dana od datuma porudžbine. Proizvod mora biti neupotrebljen, neotvoren i u originalnom pakovanju sa svim uključenim dodacima. Povraćaj novca se obrađuje u roku od 5-7 radnih dana nakon što primimo vraćeni artikal. Molimo vas da imate na umu da troškovi dostave i povezani troškovi nisu povraćajni.