Epro PR9266-12 Velocity Vibration Sensor Industrial
$178.00
$390.00
Description
Product Overview
The PR9266-12 is a self-generating electrodynamic velocity sensor designed for absolute vibration monitoring in rotating equipment. It directly converts mechanical motion into a proportional electrical signal, eliminating the need for external excitation power.
The sensing principle is based on electromagnetic induction, making it suitable for continuous vibration measurement in turbines, compressors, pumps, electric motors, and gearbox assemblies where stable broadband response is required.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | PR9266-12 |
| Sensor Principle | Electrodynamic velocity transducer |
| Measurement Principle | Electromagnetic induction (velocity proportional output) |
| Sensitivity | ~28.5 mV/mm/s (±5% at 50 Hz, 20 °C, 100 kΩ load) |
| Frequency Response | 4 Hz – 1,000 Hz |
| Usable Vibration Range | Up to ~2 mm peak-to-peak (variant dependent up to ~3 mm) |
| Natural Frequency | ~4.5 Hz (±0.5 Hz) |
| Damping Ratio | ~0.6 at 20 °C, ~0.43 at 100 °C |
| Coil Resistance | ~1,800 Ω ±12% |
| Coil Inductance | Excitation ~75 mH, sensing coil ~62 mH |
| Output Type | AC voltage proportional to vibration velocity |
| Power Requirement | Self-powered (no external supply required) |
| Operating Temperature | -20 °C to +150 °C |
| Storage Temperature | -40 °C to +70 °C |
| Shock Resistance | 10 g continuous, 20 g short-term |
| Protection Rating | IP65 (environment dependent installation) |
| Housing Material | Aluminum alloy (AlMgSiPb) or stainless steel option |
| Cable Type | PTFE insulated, 3 m standard; armored options available |
| Mounting Style | Vertical or horizontal (base plate mounting options) |
| Standards Compliance | API 670, ISO 10817-1, DIN 45670, CE, RoHS |
Engineering Characteristics
-
True velocity measurement eliminates integration drift issues
-
Self-powered operation improves reliability in isolated installations
-
Stable linear response across industrial vibration frequency bands
-
High thermal stability for long-term operation in hot environments
-
Robust mechanical structure designed for harsh vibration zones
Application Scope
-
Steam and gas turbine vibration monitoring
-
Compressor casing and shaft vibration detection
-
Pump condition and cavitation monitoring
-
Electric motor and generator health assessment
-
Gearbox structural vibration analysis
Installation Notes
-
Mounting rigidity directly impacts measurement accuracy
-
Recommended installation on rigid, flat metallic surfaces
-
Cable shielding required in high electromagnetic interference environments
-
Sensor orientation (vertical/horizontal) should match calibration configuration
FAQ
Q1: Does the PR9266-12 require external power?
No. It is a self-generating electrodynamic sensor and operates without external excitation.
Q2: What type of signal does it output?
It produces an analog AC voltage proportional to vibration velocity.
Q3: Can it measure low-frequency vibration?
Yes, with a lower limit of approximately 4 Hz depending on installation conditions.
Features
Minimalna količina porudžbine (MOQ)
Dobrodošli su nam veleprodajni nalozi i imamo minimalnu količinu narudžbine od samo jedne jedinice.
Sertifikati i dokumentacija
Na zahtev, možemo obezbediti svu potrebnu dokumentaciju, uključujući Sertifikate o poreklu/usaglašenosti i druge potrebne izvozničke dokumente.
Vreme isporuke
Za artikle na lageru, cilj nam je da isporučimo u roku od 1-3 dana nakon potvrde uplate. Artikli sa navedenim rokovima isporuke biće isporučeni u skladu sa navedenim rasporedom.
Metode plaćanja
Prihvatamo 100% T/T (telegrafski transfer) plaćanje pre slanja. Za artikle sa vremenom isporuke, zahteva se avans od 30%, dok se preostalih 70% plaća pre slanja. Za RMB transfere, molimo kontaktirajte nas ako imate agenta u Kini.
Garancija
Нудимо стандардну једногодишњу гаранцију на све нове и оригиналне артикле. Ако вам је потребна продужена гаранција, молимо контактирајте нас за детаље о додатним трошковима.
Politika povraćaja novca i vraćanja robe
Vaše zadovoljstvo nam je važno. Ako treba da vratite artikal, to mora biti urađeno u roku od 30 dana od datuma porudžbine. Proizvod mora biti neupotrebljen, neotvoren i u originalnom pakovanju sa svim uključenim dodacima. Povraćaj novca se obrađuje u roku od 5-7 radnih dana nakon što primimo vraćeni artikal. Molimo vas da imate na umu da troškovi dostave i povezani troškovi nisu povraćajni.
Istaknuto
Komplementarni proizvodi
Ekspresna dostava
Brza dostava za vaše hitne potrebe.
Veliki inventar
Obimne zalihe obezbeđuju brzu dostupnost.
Premium Kvalitet
Pravi, visokokvalitetni PLC i DCS komponenti.
24/7 korisnička podrška
Pouzdana usluga za klijente širom sveta.