Description
Product Description
The GE WESDAC D20K I/O Module is a high-performance interface card designed for the D20/D200 RTU family. It enables seamless integration between field devices and the D20K processor, supporting both digital and analog signals. Its modular design allows flexible expansion and easy maintenance in substation automation environments.
Key Features
-
Plug-in modular card compatible with D20/D200 chassis
-
Supports multiple signal types: Digital Input (DI), Digital Output (DO), Analog Input (AI), Analog Output (AO)
-
Hot-swappable for uninterrupted operation
-
High optical/electrical isolation between channels and system bus
-
Supports redundant power supply for critical reliability
-
Rugged industrial-grade design suitable for harsh substation conditions
Technical Specifications
| Specification | Details |
|---|---|
| Model Family | WESDAC D20K I/O Modules |
| Signal Types Supported | Digital Input, Digital Output, Analog Input, Analog Output |
| Digital Input Range | 24 V DC nominal (wet or dry contact) |
| Digital Output Range | 24 V DC nominal, 0.5–1 A per channel (relay or transistor) |
| Analog Input Range | 0–5 V or 4–20 mA (configurable) |
| Analog Output Range | 4–20 mA (for actuator or transducer control) |
| Isolation | Optical/electrical, 1.5–2.5 kV between input and logic |
| Communication Interface | Internal D20 backplane bus (RS-485 / DLink) |
| Mounting | Plug-in card for D20 chassis |
| Operating Voltage | 24 V DC, 48 V DC, 125 V DC (model-specific) |
| Control/Output Channels | 8 or 16 channels (model-dependent) |
| Analog Input Channels | 8 or 16 channels depending on sub-model |
| Operating Temperature | –40°C to +70°C |
| Storage Temperature | –40°C to +85°C |
| Humidity | 5%–95% non-condensing |
| Dimensions | 120 × 60 × 40 mm |
| Weight | 0.3 kg |
Applications
The GE WESDAC D20K I/O Module is widely used in substation automation for:
-
Monitoring switches, relays, sensors, and transducers
-
Controlling actuators and protective devices
-
Collecting analog and digital signals for SCADA integration
-
Expanding RTU capacity in mission-critical energy management systems
FAQ
Q: Can this module be used with older D20/D200 systems?
A: Yes, it is fully compatible with the D20/D200 RTU chassis.
Q: Is it hot-swappable?
A: Yes, modules can be replaced without powering down the system.
Q: What signal types does it support?
A: Digital Input/Output and Analog Input/Output, configurable per module.
Q: How many channels are available per module?
A: Depending on the sub-model, 8 or 16 channels for both analog and digital I/O.
Q: What operating voltages are supported?
A: 24 V DC, 48 V DC, and 125 V DC depending on the module version.
Features
Dobrodošli su nam veleprodajni nalozi i imamo minimalnu količinu narudžbine od samo jedne jedinice.
Na zahtev, možemo obezbediti svu potrebnu dokumentaciju, uključujući Sertifikate o poreklu/usaglašenosti i druge potrebne izvozničke dokumente.
Za artikle na lageru, cilj nam je da isporučimo u roku od 1-3 dana nakon potvrde uplate. Artikli sa navedenim rokovima isporuke biće isporučeni u skladu sa navedenim rasporedom.
Prihvatamo 100% T/T (telegrafski transfer) plaćanje pre slanja. Za artikle sa vremenom isporuke, zahteva se avans od 30%, dok se preostalih 70% plaća pre slanja. Za RMB transfere, molimo kontaktirajte nas ako imate agenta u Kini.
Нудимо стандардну једногодишњу гаранцију на све нове и оригиналне артикле. Ако вам је потребна продужена гаранција, молимо контактирајте нас за детаље о додатним трошковима.
Vaše zadovoljstvo nam je važno. Ako treba da vratite artikal, to mora biti urađeno u roku od 30 dana od datuma porudžbine. Proizvod mora biti neupotrebljen, neotvoren i u originalnom pakovanju sa svim uključenim dodacima. Povraćaj novca se obrađuje u roku od 5-7 radnih dana nakon što primimo vraćeni artikal. Molimo vas da imate na umu da troškovi dostave i povezani troškovi nisu povraćajni.