General Electric 951-1058-FD Turbine Control Electronic Module

Overview

The General Electric 951-1058-FD is an industrial electronic control module engineered for integration into GE turbine control and protection systems. Designed to operate within GE control racks, this module supports reliable signal handling, internal communication, and system-level coordination required in mission-critical power and process environments.

Built to GE industrial standards, the 951-1058-FD is suitable for continuous duty operation under wide environmental conditions and is commonly deployed in turbine monitoring, regulation, and protection architectures.

Technical Specifications

• Manufacturer: General Electric (GE)

• Model: 951-1058-FD

• Module Category: Control and Signal Processing Board (FD Variant)

• System Compatibility: GE turbine control platforms and associated industrial control racks

• Form Factor: Standard GE rack-mount electronic module

• Dimensions: 266 × 191 × 63 mm

• Weight: 0.5 kg

• Input Power: 24 VDC supplied via system backplane

• Operating Temperature Range: –40 °C to +70 °C

• Storage Temperature Range: –55 °C to +85 °C

• Humidity Tolerance: 5–95% RH, non-condensing

• Electrical Protection: Noise suppression, signal isolation, and industrial-grade EMC immunity

• Installation Method: Slot-mounted into GE control racks

Functional Characteristics

• Supports internal signal conditioning and data transfer within turbine control systems

• Designed for stable operation in electrically noisy industrial environments

• Optimized for continuous operation in power generation and heavy process facilities

• Ensures compatibility with existing GE rack architectures and control backplanes

Typical Applications

• Steam and gas turbine control systems

• Power generation plant automation

• Turbine protection and monitoring subsystems

• Industrial process control environments requiring GE-specific hardware

Compatibility Notes

The 951-1058-FD is intended for use within GE turbine and industrial control families that support FD-series electronic boards. Prior to installation, rack type, firmware revision, and system configuration should be verified to ensure full compatibility.

Frequently Asked Questions

Q: Is the 951-1058-FD interchangeable with other FD-series boards?
A: Functional interchangeability depends on system architecture and firmware. Always confirm with GE system documentation before substitution.

Q: Does this module require external power wiring?
A: No. Power is supplied directly through the GE control rack backplane at 24 VDC.

Q: Is this module suitable for outdoor turbine installations?
A: Yes. When installed in a properly rated enclosure, the module supports wide temperature and humidity ranges typical of turbine environments.