Description
Overview
The Yokogawa ANR11D‑420 S1 is a high-reliability 4–20 mA analog input module designed for integration into Yokogawa Node Interface Units (ANB10D, ANB11D, ANB12D) within CENTUM VP and CENTUM CS 3000 control systems. As part of the I/O Node architecture, it converts field analog signals into digital data, providing precise, isolated inputs to the Field Control Unit (FCU) for real-time process control.
This module is engineered for mission-critical industrial operations, offering robust signal isolation, continuous diagnostics, and seamless communication with redundant or standard node configurations.
Technical Specifications
General Information
| Parameter | Specification |
|---|---|
| Model | ANR11D‑420 S1 |
| Module Type | Analog Input (4–20 mA) |
| Node Type | Node Interface Unit Module |
| Compatible Systems | CENTUM VP, CENTUM CS 3000 |
| Installed In | ANB10D, ANB11D, ANB12D |
| Manufacturer | Yokogawa Electric Corporation |
| Hardware/Firmware Revision | S1 |
Electrical Characteristics
-
Input Signal: 4–20 mA
-
Typical Channels: 8–16 per module
-
Input Burden: Low (minimizes transmitter loading)
-
Accuracy: ±0.1% FS (typical)
-
Isolation: Channel-to-channel, Channel-to-system, optical/electrical
-
Diagnostics: Open-circuit detection, range validation, module health monitoring
Node Interface Integration
-
Communication via ANB-series backplane
-
Redundant node operation support
-
Online replacement in redundant configurations
-
Compatible with marshalling and terminal boards (TBT, TERT, TE16 series)
Environmental Conditions
| Parameter | Specification |
|---|---|
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | −20°C to 85°C |
| Relative Humidity | 5–95% RH, non-condensing |
| EMI/EMC Compliance | Industrial-grade |
| Vibration Resistance | Cabinet-level suitable |
Mechanical Features
-
Form Factor: Plug-in I/O module
-
Mounting: ANB-series Node Interface Unit
-
Cooling: Passive convection
Applications
-
4–20 mA signal acquisition from pressure, temperature, flow, and level transmitters
-
Analytical and laboratory instrument integration
-
Real-time process monitoring in DCS control loops
-
Industrial control requiring precise and isolated analog inputs
FAQ / Similar Models
Q: Can the module operate in a redundant node setup?
A: Yes, it supports online replacement and full operation in redundant node configurations.
Q: What are the alternatives for higher channel density?
A: The ANR16D series supports 16-channel analog inputs with similar isolation and diagnostic features.
Q: Can it interface directly with field transmitters?
A: Yes, it is designed to interface with 4–20 mA transmitters via standard Yokogawa Node Units.
Features
Dobrodošli su nam veleprodajni nalozi i imamo minimalnu količinu narudžbine od samo jedne jedinice.
Na zahtev, možemo obezbediti svu potrebnu dokumentaciju, uključujući Sertifikate o poreklu/usaglašenosti i druge potrebne izvozničke dokumente.
Za artikle na lageru, cilj nam je da isporučimo u roku od 1-3 dana nakon potvrde uplate. Artikli sa navedenim rokovima isporuke biće isporučeni u skladu sa navedenim rasporedom.
Prihvatamo 100% T/T (telegrafski transfer) plaćanje pre slanja. Za artikle sa vremenom isporuke, zahteva se avans od 30%, dok se preostalih 70% plaća pre slanja. Za RMB transfere, molimo kontaktirajte nas ako imate agenta u Kini.
Нудимо стандардну једногодишњу гаранцију на све нове и оригиналне артикле. Ако вам је потребна продужена гаранција, молимо контактирајте нас за детаље о додатним трошковима.
Vaše zadovoljstvo nam je važno. Ako treba da vratite artikal, to mora biti urađeno u roku od 30 dana od datuma porudžbine. Proizvod mora biti neupotrebljen, neotvoren i u originalnom pakovanju sa svim uključenim dodacima. Povraćaj novca se obrađuje u roku od 5-7 radnih dana nakon što primimo vraćeni artikal. Molimo vas da imate na umu da troškovi dostave i povezani troškovi nisu povraćajni.